Skip to content

Bayfield County Fire and EMS Frequencies

Bayfield County in Wisconsin has 2 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 28 cities and communities below for local fire departments and EMS agencies.

About Bayfield County Fire and EMS Frequencies

Quick answer: Fire dispatch for Bayfield County: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL. Trunked: WISCOM, for example Bayfield County Fire talkgroup 24505 (hex 5fb9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bayfield County, start with the Iron River site of WISCOM. Its control channels: 139.1125, 152.0225, 152.1425 MHz.

Data updated .

Bayfield County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Dispatch154.9800
In 153.9800
146.2 PLFMNWQVI450

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Fireground/Tactical154.2200146.2 PLFMNWPNP958

Bayfield County trunked talkgroups

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Bayfield County FireBayfield County Page245055fb9D
Bayfield County FireBayfield County Fire245075fbbD
Bayfield County FireBayfield County Fire245085fbcD
Bayfield County EMSBayfield County EMS245065fbaD
Bayfield County EMSGreat Divide EMS245265fceD

Radio system sites in Bayfield County

Program the control channel first; your scanner finds the voice channels from it.

Iron River · WISCOM
RFSS 1 · Site 62 (hex 3E) · NAC B0A
Control 139.1125, 152.0225, 152.1425
Voice 150.935, 151.22
Bayfield · WISCOM
RFSS 1 · Site 67 (hex 43) · NAC B0C
Control 139.4125, 152.5925, 152.7575
Voice 154.725, 155.13
Grand View · WISCOM
RFSS 1 · Site 106 (hex 6A) · NAC B01
Control 139.6375, 152.1125, 152.2025, 152.6525, 152.8025
Red Cliff · WISCOM
RFSS 1 · Site 121 (hex 79) · NAC B0C
Control 154.0475, 154.9275, 155.07, 155.1, 155.55
Hillside · WISCOM
RFSS 1 · Site 122 (hex 7A) · NAC B03
Control 151.1825, 151.2275, 151.295, 151.3375
Port Wing · WISCOM
RFSS 1 · Site 123 (hex 7B) · NAC B0C
Control 151.01, 151.3325, 154.1825
Voice 155.6025
Cable · WISCOM
RFSS 1 · Site 124 (hex 7C) · NAC B0C
Control 151.2575, 152.5025, 155.325
Voice 151.475, 154.695
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bayfield County

Common questions

What frequency does the fire department use in Bayfield County?

Fire dispatch channels listed for Bayfield County: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Bayfield County?

Yes. Fire and EMS talkgroups are listed for WISCOM: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bayfield County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bayfield County?

For Bayfield County, start with the Iron River site of WISCOM. Its control channels are 139.1125, 152.0225, 152.1425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bayfield County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Bayfield County are marked encrypted.

Are Bayfield County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Bayfield County are marked encrypted.