Skip to content

Cable Fire and EMS Frequencies

We do not have frequencies listed specifically for Cable in Bayfield County, Wisconsin yet. Countywide channels for Bayfield County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cable (WISCOM), about 0 miles away.

About Cable Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cable: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL. Trunked: WISCOM, for example Bayfield County Fire talkgroup 24505 (hex 5fb9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cable, start with the Cable site of WISCOM, about 0 miles away. Its control channels: 151.2575, 152.5025, 155.325 MHz.

Data updated .

Bayfield County channels that also cover Cable

Fire Dispatch

Fire Dispatch frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Dispatch154.9800
In 153.9800
146.2 PLFMNWQVI450

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Fireground/Tactical154.2200146.2 PLFMNWPNP958

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Bayfield County FireBayfield County Page245055fb9D
Bayfield County FireBayfield County Fire245075fbbD
Bayfield County FireBayfield County Fire245085fbcD
Bayfield County EMSBayfield County EMS245065fbaD
Bayfield County EMSGreat Divide EMS245265fceD

Nearest trunked radio sites

Distances are measured from the center of Cable.

Cable · WISCOM
RFSS 1 · Site 124 (hex 7C) · NAC B0C · about 0 mi away
Control 151.2575, 152.5025, 155.325
Voice 151.475, 154.695
Grand View · WISCOM
RFSS 1 · Site 106 (hex 6A) · NAC B01 · about 15 mi away
Control 139.6375, 152.1125, 152.2025, 152.6525, 152.8025
Hayward · WISCOM
RFSS 1 · Site 61 (hex 3D) · NAC B08 · about 15 mi away
Control 139.7375, 151.055
Voice 151.34, 154.19, 154.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cable?

We do not have a fire dispatch channel listed specifically for Cable. The county-level fire dispatch channels in the same county: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Cable?

Yes. The county-level systems that cover Cable are Fire and EMS talkgroups are listed for WISCOM: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cable?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cable?

For Cable, start with the Cable site of WISCOM. Its control channels are 151.2575, 152.5025, 155.325 MHz. Program a control channel first; the scanner finds the voice channels from it.