About Chetek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Chetek: Barron County Fire 151.2350 MHz, narrow FM, 141.3 PL. Trunked: WISCOM, for example Barron County EMS talkgroup 23526 (hex 5be6).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: WISCOM: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chetek, start with the Hillsdale site of WISCOM, about 15 miles away. Its control channels: 139.2625, 151.07, 152.6675 MHz.
Data updated .
Chetek conventional frequencies
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chetek Fire | Chetek Fire – Alternate | 155.0475 In 159.1050 | 047 DPL | FMN | WRMM209 |
| Chetek Fire | Chetek Fire – Alternate | 155.0475 In 159.1050 | NAC 728 | P25 | WRMM209 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chetek EMS | Chetek EMS – Alternate | 155.1750 | 82.5 PL | FMN | WRMM209 |
Barron County channels that also cover Chetek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Barron County Fire | Fire/EMS Page | 151.2350 | 141.3 PL | FMN | WSDY239 |
| Barron County Fire | Fire/EMS Dispatch | 154.3775 In 158.7600 | NAC 030 | P25 | WSDY239 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Barron County Fire | Barron County Fire – Fire Ground | 154.3100 | 141.3 PL | FMN | — |
| Barron County Fire | Fire/EMS Operations | 154.8225 | 306 DPL | FMN | WSDY239 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospitals EMS | Barron Memorial Medical Center | 155.2800 | 82.5 PL | FMN | KUJ675 |
| Hospitals EMS | Barron Memorial Medical Center | 155.3400 | 82.5 PL | FMN | KUJ675 |
| Hospitals EMS | Cumberland Memorial Hospital | 155.3400 | 146.2 PL | FMN | KOP900 |
| Hospitals EMS | Marshfield Medical Center, Rice Lake | 155.3400 | 192.8 PL | FMN | WPUG544 |
WISCOM
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Barron County EMS | Mayo Ambulance – Barron | 23526 | 5be6 | D |
Nearest trunked radio sites
Distances are measured from the center of Chetek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Chetek?
We do not have a fire dispatch channel listed specifically for Chetek. The county-level fire dispatch channels in the same county: Barron County Fire 151.2350 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Chetek?
Yes. The county-level systems that cover Chetek are Fire and EMS talkgroups are listed for WISCOM: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Chetek?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chetek?
For Chetek, start with the Hillsdale site of WISCOM. Its control channels are 139.2625, 151.07, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Chetek fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Chetek are marked encrypted.