Skip to content

Cameron Fire and EMS Frequencies

Cameron in Barron County, Wisconsin has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Hillsdale (WISCOM), about 12 miles away.

About Cameron Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cameron: Barron County Fire 151.2350 MHz, narrow FM, 141.3 PL. Trunked: WISCOM, for example Barron County EMS talkgroup 23526 (hex 5be6).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cameron, start with the Hillsdale site of WISCOM, about 12 miles away. Its control channels: 139.2625, 151.07, 152.6675 MHz.

Data updated .

Cameron conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cameron
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cameron FireCameron Fire – Fire Ground155.2050423 DPLFMNWQHX245

Barron County channels that also cover Cameron

Fire Dispatch

Fire Dispatch frequencies for Barron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barron County FireFire/EMS Page151.2350141.3 PLFMNWSDY239
Barron County FireFire/EMS Dispatch154.3775
In 158.7600
NAC 030P25WSDY239

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Barron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barron County FireBarron County Fire – Fire Ground154.3100141.3 PLFMN—
Barron County FireFire/EMS Operations154.8225306 DPLFMNWSDY239

EMS Talk-around

EMS Talk-around frequencies for Barron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hospitals EMSBarron Memorial Medical Center155.280082.5 PLFMNKUJ675
Hospitals EMSBarron Memorial Medical Center155.340082.5 PLFMNKUJ675
Hospitals EMSCumberland Memorial Hospital155.3400146.2 PLFMNKOP900
Hospitals EMSMarshfield Medical Center, Rice Lake155.3400192.8 PLFMNWPUG544

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Barron County EMSMayo Ambulance – Barron235265be6D

Nearest trunked radio sites

Distances are measured from the center of Cameron.

Hillsdale · WISCOM
RFSS 1 · Site 75 (hex 4B) · NAC B04 · about 12 mi away
Control 139.2625, 151.07, 152.6675
Voice 150.905, 155.76
Shell Lake · WISCOM
RFSS 1 · Site 68 (hex 44) · NAC B08 · about 26 mi away
Control 139.7375, 151.25, 152.7725
Voice 154.175, 155.01
Wheeler · WISCOM
RFSS 1 · Site 135 (hex 87) · NAC B02 · about 26 mi away
Control 150.8825, 154.9275
Voice 155.61
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cameron?

We do not have a fire dispatch channel listed specifically for Cameron. The county-level fire dispatch channels in the same county: Barron County Fire 151.2350 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Cameron?

Yes. The county-level systems that cover Cameron are Fire and EMS talkgroups are listed for WISCOM: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cameron?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cameron?

For Cameron, start with the Hillsdale site of WISCOM. Its control channels are 139.2625, 151.07, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cameron fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Cameron are marked encrypted.