Skip to content

Pulaski Fire and EMS Frequencies

We do not have frequencies listed specifically for Pulaski in Pulaski County, Virginia yet. Countywide channels for Pulaski County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Site 1.2 Simulcast (Pulaski County), about 4 miles away.

About Pulaski Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pulaski: Pulaski, County of 453.5250 MHz, FM, 79.7 PL; Pulaski, Town of Fire 453.7000 MHz, FM, 74.4 PL; Radford Army Ammunition Plant Fire 166.2000 MHz, FM, no tone. County-level ems dispatch that covers Pulaski: Pulaski, County of 453.0250 MHz, narrow FM, 100.0 PL. Trunked: Pulaski County, for example Pulaski County EMS talkgroup 261401 (hex 3fd19).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Pulaski County: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pulaski, start with the Site 1.2 Simulcast site of Pulaski County, about 4 miles away. Its control channels: 453.2875 MHz.

Data updated .

Pulaski County channels that also cover Pulaski

Fire Dispatch

Fire Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski, County ofPulaski, County of – Dispatch453.5250
In 458.5250
79.7 PLFMWNXJ936
Pulaski, County ofFire/Rescue Paging453.8250FMNWNPK310
Pulaski, Town of FirePulaski, Town of Fire – Dispatch453.700074.4 PLFMKBP889
Radford Army Ammunition Plant FireSecurity/Fire166.2000FM—

EMS Dispatch

EMS Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski, County ofPulaski, County of – Dispatch453.0250
In 458.0250
100.0 PLFMNWYR840

Hospitals & Medical

Hospitals & Medical frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski, County ofPulaski, County of – Ambulance to Hospital462.9750103.5 PLFMWZU268

Pulaski County

Pulaski County talkgroups
AgencyDescriptionTalkgroupHexMode
Pulaski County EMSPulaski County EMS – Dispatch2614013fd19T

Nearest trunked radio sites

Distances are measured from the center of Pulaski.

Site 1.2 Simulcast · Pulaski County
Site 2 (hex 2) · about 4 mi away
Control 453.2875
Dismal Mountain · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 8 (hex 8) · NAC 19D · about 19 mi away
Control 152.5625, 152.6075, 161.9125
Voice 159.2625
Big Walker Mountain · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 28 (hex 1C) · about 23 mi away
Control 159.4275, 161.9125
Voice 151.43, 159.27
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pulaski?

We do not have a fire dispatch channel listed specifically for Pulaski. The county-level fire dispatch channels in the same county: Pulaski, County of 453.5250 MHz, FM, 79.7 PL; Pulaski, Town of Fire 453.7000 MHz, FM, 74.4 PL; Radford Army Ammunition Plant Fire 166.2000 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Pulaski?

We do not have a EMS dispatch channel listed specifically for Pulaski. The county-level EMS dispatch channels in the same county: Pulaski, County of 453.0250 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Pulaski?

Yes. The county-level systems that cover Pulaski are Fire and EMS talkgroups are listed for Pulaski County: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pulaski?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pulaski?

For Pulaski, start with the Site 1.2 Simulcast site of Pulaski County. Its control channels are 453.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.