Skip to content

Wayne County Fire and EMS Frequencies

Wayne County in Utah has 1 countywide conventional frequency and 4 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Wayne County Fire and EMS Frequencies

Quick answer: EMS dispatch for Wayne County: Wayne County EMS 155.2800 MHz, narrow FM, CSQ. Trunked: Utah Communications Authority (P25) (Project 25), for example Wayne County Fire talkgroup 9302 (hex 2456).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wayne County, start with the Teasdale Peak site of Utah Communications Authority (P25). Its control channels: 769.41875, 773.93125 MHz.

Data updated .

Wayne County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County EMSEMS paging/ambulance155.2800CSQFMNWQCE439

Wayne County trunked talkgroups

Utah Communications Authority (P25)

Project 25 · System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Wayne County FireWayne County Fire – Dispatch93022456T
Wayne County FireCar to Car93202468T
Wayne County EMSWayne County EMS – Dispatch93012455T
Wayne County EMSCar to Car93212469T

Radio system sites in Wayne County

Program the control channel first; your scanner finds the voice channels from it.

Teasdale Peak · Utah Communications Authority (P25)
Project 25 · RFSS 103 · Site 103 (hex 67) · NAC 1F7
Control 769.41875, 773.93125
Voice 772.55625, 772.86875, 773.21875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wayne County

Common questions

What frequency does EMS or the ambulance service use in Wayne County?

EMS dispatch channels listed for Wayne County: Wayne County EMS 155.2800 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Wayne County?

Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wayne County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wayne County?

For Wayne County, start with the Teasdale Peak site of Utah Communications Authority (P25). Its control channels are 769.41875, 773.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wayne County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Wayne County are marked encrypted.

Are Wayne County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Wayne County are marked encrypted.