About Sevier County Fire and EMS Frequencies
Quick answer: EMS dispatch for Sevier County: Sevier County EMS 151.3700 MHz, narrow FM, 107.2 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Sevier County Fire talkgroup 9289 (hex 2449).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sevier County, start with the Pipe Springs site of Utah Communications Authority (P25). Its control channels: 769.58125, 774.68125 MHz.
Data updated .
Sevier County conventional frequencies
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sevier County EMS | Sevier County EMS Paging (Carters Peak) | 151.3700 In 155.0850 | 107.2 PL | FMN | KGK676 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sevier County EMS | Sevier County EMS Operations (Carters Peak) | 156.1875 In 155.0250 | 100.0 PL | FMN | KGK676 |
Sevier County trunked talkgroups
Utah Communications Authority (P25)
Project 25 ยท System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sevier County Fire | Fire & Rescue ? | 9289 | 2449 | T |
| Sevier County Fire | Sevier County Fire โ Dispatch | 9299 | 2453 | T |
| Sevier County Fire | Sevier County Fire โ Alternate | 9300 | 2454 | T |
| Sevier County Fire | Search and Rescue | 9311 | 245f | T |
| Sevier County EMS | Sevier County EMS โ Dispatch | 9298 | 2452 | T |
Radio system sites in Sevier County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Sevier County
Common questions
What frequency does EMS or the ambulance service use in Sevier County?
EMS dispatch channels listed for Sevier County: Sevier County EMS 151.3700 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Sevier County?
Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sevier County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sevier County?
For Sevier County, start with the Pipe Springs site of Utah Communications Authority (P25). Its control channels are 769.58125, 774.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sevier County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Sevier County are marked encrypted.
Are Sevier County fire and EMS talkgroups encrypted?
None of the 5 talkgroups listed for Sevier County are marked encrypted.