About Richfield Fire and EMS Frequencies
Quick answer: Fire dispatch for Richfield: Richfield Fire 154.1450 MHz, narrow FM, no tone. County-level ems dispatch that covers Richfield: Sevier County EMS 151.3700 MHz, narrow FM, 107.2 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Sevier County Fire talkgroup 9289 (hex 2449).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Richfield, start with the White Pine Peak site of Utah Communications Authority (P25), about 10 miles away. Its control channels: 769.29375, 774.84375 MHz.
Data updated .
Richfield conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Richfield Fire | Richfield Fire | 154.1450 | FMN | WQJK772 |
Sevier County channels that also cover Richfield
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sevier County EMS | Sevier County EMS Paging (Carters Peak) | 151.3700 In 155.0850 | 107.2 PL | FMN | KGK676 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sevier County EMS | Sevier County EMS Operations (Carters Peak) | 156.1875 In 155.0250 | 100.0 PL | FMN | KGK676 |
Utah Communications Authority (P25)
Project 25 ยท System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sevier County Fire | Fire & Rescue ? | 9289 | 2449 | T |
| Sevier County Fire | Sevier County Fire โ Dispatch | 9299 | 2453 | T |
| Sevier County Fire | Sevier County Fire โ Alternate | 9300 | 2454 | T |
| Sevier County Fire | Search and Rescue | 9311 | 245f | T |
| Sevier County EMS | Sevier County EMS โ Dispatch | 9298 | 2452 | T |
Nearest trunked radio sites
Distances are measured from the center of Richfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richfield?
Fire dispatch channels listed for Richfield: Richfield Fire 154.1450 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Richfield?
We do not have a EMS dispatch channel listed specifically for Richfield. The county-level EMS dispatch channels in the same county: Sevier County EMS 151.3700 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Richfield?
Yes. The county-level systems that cover Richfield are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Richfield?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Richfield?
For Richfield, start with the White Pine Peak site of Utah Communications Authority (P25). Its control channels are 769.29375, 774.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Richfield fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Richfield are marked encrypted.