Skip to content

Grand County Fire and EMS Frequencies

Grand County in Utah has 4 countywide conventional frequencies and 13 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Grand County Fire and EMS Frequencies

Quick answer: Fire dispatch for Grand County: Grand County Fire 153.7700 MHz, narrow FM, 103.5 PL. EMS dispatch for Grand County: Grand County EMS 155.1300 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Grand County Fire talkgroup 8899 (hex 22c3).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups; Utah Communications Authority (P25) (Project 25): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grand County, start with the Bald Mesa site of Carbon and Emery County Digital System. Its control channels: 155.64 MHz.
  • 3 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Grand County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Grand County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grand County FireGrand County Fire – Dispatch153.7700103.5 PLFMNWNHT416

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Grand County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grand County FireGrand County Fire – Tactical Channel154.4300103.5 PLFMNWNHT416

EMS Dispatch

EMS Dispatch frequencies for Grand County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grand County EMSNorth (UCA 8815)155.1300
In 151.3400
100.0 PLFMNWQIR916
Grand County EMSGrand County EMS – Dispatch (UCA 8815)155.8350
In 151.3400
100.0 PLFMNKNIC398

Grand County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Grand County FireSearch and Rescue889922c3D
Grand County FireSearch and Rescue Tactical890022c4D
Grand County FireSearch and Rescue Tactical890122c5D
3 encrypted talkgroups (cannot be monitored)
State of Colorado DTRS encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Grand County FireLE/Fire/EMS Dispatch888622b6D Encrypted
Grand County EMSGrand County EMS – Tactical Channel888722b7D Encrypted
Grand County EMSGrand County EMS – Tactical Channel888822b8D Encrypted

Utah Communications Authority (P25)

Project 25 · System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Grand County FireGrand County Fire – Dispatch8815226fT
Grand County FireSearch and Rescue88212275T
Grand County FireGrand County Fire – Alternate88162270T
Grand County FireGrand County Fire – Alternate88172271T
Grand County FireGrand County Fire – Alternate88182272T
Grand County FireFire/EMS Car to Car8829227dT
Grand County FireSearch and Rescue Car to Car8830227eT

Radio system sites in Grand County

Program the control channel first; your scanner finds the voice channels from it.

Bald Mesa · Carbon and Emery County Digital System
Site 13 (hex D)
Control 155.64
Willow Peak · Utah Communications Authority (P25)
Project 25 · RFSS 117 · Site 117 (hex 75) · NAC 205
Control 771.30625, 773.71875
Voice 771.60625, 771.83125, 772.43125, 773.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Grand County

Common questions

What frequency does the fire department use in Grand County?

Fire dispatch channels listed for Grand County: Grand County Fire 153.7700 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Grand County?

EMS dispatch channels listed for Grand County: Grand County EMS 155.1300 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Grand County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups; Utah Communications Authority (P25) (Project 25): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grand County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grand County?

For Grand County, start with the Bald Mesa site of Carbon and Emery County Digital System. Its control channels are 155.64 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grand County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Grand County are marked encrypted.

Are Grand County fire and EMS talkgroups encrypted?

3 of the 13 talkgroups listed for Grand County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.