About Moab Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Moab: Grand County Fire 153.7700 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Moab: Grand County EMS 155.1300 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Grand County Fire talkgroup 8899 (hex 22c3).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups; Utah Communications Authority (P25) (Project 25): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Moab, start with the Bald Mesa site of Carbon and Emery County Digital System, about 12 miles away. Its control channels: 155.64 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Grand County channels that also cover Moab
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grand County Fire | Grand County Fire – Dispatch | 153.7700 | 103.5 PL | FMN | WNHT416 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grand County Fire | Grand County Fire – Tactical Channel | 154.4300 | 103.5 PL | FMN | WNHT416 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grand County EMS | North (UCA 8815) | 155.1300 In 151.3400 | 100.0 PL | FMN | WQIR916 |
| Grand County EMS | Grand County EMS – Dispatch (UCA 8815) | 155.8350 In 151.3400 | 100.0 PL | FMN | KNIC398 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grand County Fire | Search and Rescue | 8899 | 22c3 | D |
| Grand County Fire | Search and Rescue Tactical | 8900 | 22c4 | D |
| Grand County Fire | Search and Rescue Tactical | 8901 | 22c5 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grand County Fire | LE/Fire/EMS Dispatch | 8886 | 22b6 | D Encrypted |
| Grand County EMS | Grand County EMS – Tactical Channel | 8887 | 22b7 | D Encrypted |
| Grand County EMS | Grand County EMS – Tactical Channel | 8888 | 22b8 | D Encrypted |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grand County Fire | Grand County Fire – Dispatch | 8815 | 226f | T |
| Grand County Fire | Search and Rescue | 8821 | 2275 | T |
| Grand County Fire | Grand County Fire – Alternate | 8816 | 2270 | T |
| Grand County Fire | Grand County Fire – Alternate | 8817 | 2271 | T |
| Grand County Fire | Grand County Fire – Alternate | 8818 | 2272 | T |
| Grand County Fire | Fire/EMS Car to Car | 8829 | 227d | T |
| Grand County Fire | Search and Rescue Car to Car | 8830 | 227e | T |
Nearest trunked radio sites
Distances are measured from the center of Moab.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Moab?
We do not have a fire dispatch channel listed specifically for Moab. The county-level fire dispatch channels in the same county: Grand County Fire 153.7700 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Moab?
We do not have a EMS dispatch channel listed specifically for Moab. The county-level EMS dispatch channels in the same county: Grand County EMS 155.1300 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Moab?
Yes. The county-level systems that cover Moab are Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups; Utah Communications Authority (P25) (Project 25): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Moab?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Moab?
For Moab, start with the Bald Mesa site of Carbon and Emery County Digital System. Its control channels are 155.64 MHz. Program a control channel first; the scanner finds the voice channels from it.