About Boulder Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Boulder: Garfield County Fire 155.8800 MHz, narrow FM, 146.2 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Garfield County Fire talkgroup 7203 (hex 1c23).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Boulder, start with the Top of Rocks site of Utah Communications Authority (P25), about 12 miles away. Its control channels: 769.40625, 773.58125 MHz.
Data updated .
Garfield County channels that also cover Boulder
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Garfield County Fire | Garfield County Fire – Dispatch (Dutton) | 155.8800 In 158.9400 | 146.2 PL | FMN | KNCR274 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Garfield County Fire | Garfield County Fire – Dispatch | 7203 | 1c23 | T |
| Garfield County Fire | Fire Operations | 7207 | 1c27 | T |
| Garfield County Fire | Garfield County Fire – Alternate | 7204 | 1c24 | T |
| Garfield County Fire | Search and Rescue | 7206 | 1c26 | T |
| Garfield County Fire | Search and Rescue Car to Car | 7214 | 1c2e | T |
| Garfield County Fire | Car to Car | 7215 | 1c2f | T |
| Garfield County EMS | Garfield County EMS – Alternate | 7205 | 1c25 | T |
| Garfield County EMS | Car to Car | 7216 | 1c30 | T |
Nearest trunked radio sites
Distances are measured from the center of Boulder.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Boulder?
We do not have a fire dispatch channel listed specifically for Boulder. The county-level fire dispatch channels in the same county: Garfield County Fire 155.8800 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Boulder?
Yes. The county-level systems that cover Boulder are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Boulder?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Boulder?
For Boulder, start with the Top of Rocks site of Utah Communications Authority (P25). Its control channels are 769.40625, 773.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.