About Washington County Fire and EMS Frequencies
Quick answer: Fire dispatch for Washington County: Washington County Fire 154.1450 MHz, narrow FM, CSQ. EMS dispatch for Washington County: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Washington Fire/EMS talkgroup 2533 (hex 9e5).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Washington County, start with the Brenham site of Texas Wide Area Radio Network (TxWARN). Its control channels: 772.70625, 774.44375 MHz.
Data updated .
Washington County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Countywide Fire Dispatch (patched with TxWARN) | 154.1450 | CSQ | FMN | KKV987 |
| Washington County Fire | Washington County Fire – Dispatch | 155.5875 | 445 DPL | FMN | KKV987 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Fire Ground (patched with TxWARN) | 155.7750 | CSQ | FMN | KNBR717 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | Dispatch, Sheriff Alternate (simulcasting with TxWARN) | 155.6250 In 154.7100 | 141.3 PL | FMN | WPNW249 |
Washington County trunked talkgroups
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington Fire/EMS | Emergency Operations Center | 2533 | 9e5 | D |
| Washington Fire/EMS | VFDs Tactical | 3933 | f5d | D |
| Washington Fire/EMS | VFDs Tactical | 3934 | f5e | D |
| Washington Fire/EMS | VFDs Tactical | 3935 | f5f | D |
| Washington Fire/EMS | VFDs Tactical | 3936 | f60 | D |
| Washington Fire/EMS | VFDs Tactical | 3937 | f61 | D |
| Washington Fire/EMS | Emergency Mgmt. 1 | 3999 | f9f | D |
| Washington Fire/EMS | Emergency Mgmt. 2 | 4000 | fa0 | D |
| Washington Fire/EMS | Volunteer Fire Department Supervisors | 3938 | f62 | D |
| Washington Fire/EMS | EMS Primary | 2529 | 9e1 | D |
| Washington Fire/EMS | EMS Medevac Helicopter Dispatch | 3990 | f96 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3939 | f63 | D |
| Washington Fire/EMS | EMS Supervisors | 3940 | f64 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3941 | f65 | D |
| Washington Fire/EMS | EMS Training | 3942 | f66 | D |
| Washington Fire/EMS | EMS to Scott and White Hospital Brenham | 3965 | f7d | D |
Radio system sites in Washington County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Washington County
Common questions
What frequency does the fire department use in Washington County?
Fire dispatch channels listed for Washington County: Washington County Fire 154.1450 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Washington County?
EMS dispatch channels listed for Washington County: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Washington County?
Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Washington County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Washington County?
For Washington County, start with the Brenham site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.70625, 774.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Washington County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Washington County are marked encrypted.
Are Washington County fire and EMS talkgroups encrypted?
None of the 16 talkgroups listed for Washington County are marked encrypted.