About Independence Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Independence: Washington County Fire 154.1450 MHz, narrow FM, CSQ. County-level ems dispatch that covers Independence: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Washington Fire/EMS talkgroup 2533 (hex 9e5).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Washington County channels that also cover Independence
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Countywide Fire Dispatch (patched with TxWARN) | 154.1450 | CSQ | FMN | KKV987 |
| Washington County Fire | Washington County Fire – Dispatch | 155.5875 | 445 DPL | FMN | KKV987 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Fire Ground (patched with TxWARN) | 155.7750 | CSQ | FMN | KNBR717 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | Dispatch, Sheriff Alternate (simulcasting with TxWARN) | 155.6250 In 154.7100 | 141.3 PL | FMN | WPNW249 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington Fire/EMS | Emergency Operations Center | 2533 | 9e5 | D |
| Washington Fire/EMS | VFDs Tactical | 3933 | f5d | D |
| Washington Fire/EMS | VFDs Tactical | 3934 | f5e | D |
| Washington Fire/EMS | VFDs Tactical | 3935 | f5f | D |
| Washington Fire/EMS | VFDs Tactical | 3936 | f60 | D |
| Washington Fire/EMS | VFDs Tactical | 3937 | f61 | D |
| Washington Fire/EMS | Emergency Mgmt. 1 | 3999 | f9f | D |
| Washington Fire/EMS | Emergency Mgmt. 2 | 4000 | fa0 | D |
| Washington Fire/EMS | Volunteer Fire Department Supervisors | 3938 | f62 | D |
| Washington Fire/EMS | EMS Primary | 2529 | 9e1 | D |
| Washington Fire/EMS | EMS Medevac Helicopter Dispatch | 3990 | f96 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3939 | f63 | D |
| Washington Fire/EMS | EMS Supervisors | 3940 | f64 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3941 | f65 | D |
| Washington Fire/EMS | EMS Training | 3942 | f66 | D |
| Washington Fire/EMS | EMS to Scott and White Hospital Brenham | 3965 | f7d | D |
Common questions
What frequency does the fire department use in Independence?
We do not have a fire dispatch channel listed specifically for Independence. The county-level fire dispatch channels in the same county: Washington County Fire 154.1450 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Independence?
We do not have a EMS dispatch channel listed specifically for Independence. The county-level EMS dispatch channels in the same county: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Independence?
Yes. The county-level systems that cover Independence are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Independence?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.