Skip to content

Grandfalls Fire and EMS Frequencies

We do not have frequencies listed specifically for Grandfalls in Ward County, Texas yet. Countywide channels for Ward County that may also cover this area are shown below when we have them. The closest trunked radio site we have is King Mountain (McCamey) (Greater Austin/Travis Regional Radio System (GATRRS)), about 38 miles away.

About Grandfalls Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grandfalls: Ward County Fire 151.2425 MHz, P25, NAC 238. County-level ems dispatch that covers Grandfalls: Ward County EMS 154.1600 MHz, P25, NAC 238.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Ward County channels that also cover Grandfalls

Fire Dispatch

Fire Dispatch frequencies for Ward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ward County FireWard County Fire – Dispatch151.2425
In 159.4575
NAC 238P25KMA934
Ward County FireWard County Fire – Dispatch151.2425
In 159.4575
100.0 PLFMNKMA934

EMS Dispatch

EMS Dispatch frequencies for Ward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ward County EMSWard County EMS – Dispatch154.1600
In 150.8050
NAC 238P25WPMD526
Ward County EMSWard County EMS – Dispatch154.1600
In 150.8050
88.5 PLFMNWPMD526

Nearest trunked radio sites

Distances are measured from the center of Grandfalls.

King Mountain (McCamey) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 83 (hex 53) · about 38 mi away
Control 154.3175, 154.7475
Voice 154.0925, 154.2425
Notrees VHF · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 85 (hex 55) · NAC 130 · about 42 mi away
Control 154.3475, 155.0325
Voice 151.1975, 154.1075
Notrees 800 MHz · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 86 (hex 56) · NAC 130 · about 43 mi away
Control 855.7375, 856.7625, 857.7375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grandfalls?

We do not have a fire dispatch channel listed specifically for Grandfalls. The county-level fire dispatch channels in the same county: Ward County Fire 151.2425 MHz, P25, NAC 238.

What frequency does EMS or the ambulance service use in Grandfalls?

We do not have a EMS dispatch channel listed specifically for Grandfalls. The county-level EMS dispatch channels in the same county: Ward County EMS 154.1600 MHz, P25, NAC 238.

What scanner do I need to listen to fire and EMS in Grandfalls?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Grandfalls?

For Grandfalls, start with the King Mountain (McCamey) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.3175, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.