Skip to content

Crane Fire and EMS Frequencies

Crane in Crane County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is King Mountain (McCamey) (Greater Austin/Travis Regional Radio System (GATRRS)), about 14 miles away.

About Crane Fire and EMS Frequencies

Quick answer: Fire dispatch for Crane: Crane Fire 154.1300 MHz, narrow FM, 88.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Crane conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crane
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crane FireCrane Fire – Dispatch (Analog)154.1300
In 159.0600
88.5 PLFMNWNLQ627
Crane FireCrane Fire – Dispatch154.1300
In 159.0600
NAC 052P25WNLQ627

Nearest trunked radio sites

Distances are measured from the center of Crane.

King Mountain (McCamey) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 83 (hex 53) · about 14 mi away
Control 154.3175, 154.7475
Voice 154.0925, 154.2425
Odessa · Permian Basin Interoperable Radio Communications System
RFSS 1 · Site 1 (hex 1) · about 30 mi away
Control 858.4875, 858.9875, 859.4875, 859.9875
Voice 854.9625, 855.4875, 855.9875, 856.4875, 856.9375, 857.2125, 857.4875, 857.9875
Odessa · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 92 (hex 5C) · NAC 130 · about 31 mi away
Control 774.06875, 774.53125
Voice 773.03125, 773.31875, 773.78125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crane?

Fire dispatch channels listed for Crane: Crane Fire 154.1300 MHz, narrow FM, 88.5 PL.

What scanner do I need to listen to fire and EMS in Crane?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Crane?

For Crane, start with the King Mountain (McCamey) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.3175, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crane fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Crane are marked encrypted.