About Walker County Fire and EMS Frequencies
Quick answer: Fire dispatch for Walker County: Walker County Fire 154.2050 MHz, narrow FM, 632 DPL. EMS dispatch for Walker County: Walker County EMS 155.2650 MHz, narrow FM, 100.0 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Walker Fire/EMS talkgroup 1124 (hex 464).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Walker County, start with the East Walker County site of Texas Wide Area Radio Network (TxWARN). Its control channels: 853.2875, 853.9 MHz.
Data updated .
Walker County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walker County Fire | Walker County Fire – Dispatch (all departments) – Linked to TxWARN TG 1124 | 154.2050 In 158.8350 | 632 DPL | FMN | KLV902 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crabbs Prairie VFD Fire | Crabbs Prairie Volunteer Fire Department Fire – Fire Ground | 154.4300 | FMN | WPEK875 | |
| Walker County Fire | Walker County Fire – Fire Ground (all departments) | 154.2050 | 100.0 PL | FMN | KLV902 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walker County EMS | EMS Paging (Primary on TxWARN TG 1120) | 155.2650 In 150.7750 | 100.0 PL | FMN | WXY253 |
Walker County trunked talkgroups
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Walker Fire/EMS | Fire 1 Operations | 1124 | 464 | D |
| Walker Fire/EMS | Tactical Fireground, possibly linked to Texas Fire | 1126 | 466 | D |
| Walker Fire/EMS | Channel 1 Primary (patched with 155.265 MHz) | 1120 | 460 | D |
| Walker Fire/EMS | Walker Fire/EMS – Tactical Channel | 1122 | 462 | D |
Radio system sites in Walker County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Walker County
Common questions
What frequency does the fire department use in Walker County?
Fire dispatch channels listed for Walker County: Walker County Fire 154.2050 MHz, narrow FM, 632 DPL.
What frequency does EMS or the ambulance service use in Walker County?
EMS dispatch channels listed for Walker County: Walker County EMS 155.2650 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Walker County?
Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Walker County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Walker County?
For Walker County, start with the East Walker County site of Texas Wide Area Radio Network (TxWARN). Its control channels are 853.2875, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Walker County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Walker County are marked encrypted.
Are Walker County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Walker County are marked encrypted.