Skip to content

Reeves County Fire and EMS Frequencies

Reeves County in Texas has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Reeves County Fire and EMS Frequencies

Quick answer: Fire dispatch for Reeves County: Reeves County Fire 154.1300 MHz, P25, NAC 405.

  • 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Reeves County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Reeves County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Reeves County FireReeves County Fire – Dispatch – Southwest (Gomez Peak)154.1300
In 158.8350
NAC 405P25WNRU642
Reeves County FireDispatch Main (Pecos)154.1975
In 158.7675
NAC 405P25WNRU642
Reeves County FireReeves County Fire – Dispatch – South154.2200
In 158.9250
NAC 405P25WNRU642
Reeves County FireReeves County Fire – Dispatch – North (Orla)154.4300
In 158.7975
NAC 405P25WNRU642

Radio system sites in Reeves County

Program the control channel first; your scanner finds the voice channels from it.

Orla · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 93 (hex 5D) · NAC 130
Control 154.8225, 155.8125
Voice 151.04, 154.025
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Reeves County

Common questions

What frequency does the fire department use in Reeves County?

Fire dispatch channels listed for Reeves County: Reeves County Fire 154.1300 MHz, P25, NAC 405.

What scanner do I need to listen to fire and EMS in Reeves County?

A scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Reeves County?

For Reeves County, start with the Orla site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.8225, 155.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Reeves County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Reeves County are marked encrypted.