About Balmorhea Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Balmorhea: Reeves County Fire 154.1300 MHz, P25, NAC 405.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Reeves County channels that also cover Balmorhea
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Reeves County Fire | Reeves County Fire – Dispatch – Southwest (Gomez Peak) | 154.1300 In 158.8350 | NAC 405 | P25 | WNRU642 |
| Reeves County Fire | Dispatch Main (Pecos) | 154.1975 In 158.7675 | NAC 405 | P25 | WNRU642 |
| Reeves County Fire | Reeves County Fire – Dispatch – South | 154.2200 In 158.9250 | NAC 405 | P25 | WNRU642 |
| Reeves County Fire | Reeves County Fire – Dispatch – North (Orla) | 154.4300 In 158.7975 | NAC 405 | P25 | WNRU642 |
Nearest trunked radio sites
Distances are measured from the center of Balmorhea.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Balmorhea?
We do not have a fire dispatch channel listed specifically for Balmorhea. The county-level fire dispatch channels in the same county: Reeves County Fire 154.1300 MHz, P25, NAC 405.
What scanner do I need to listen to fire and EMS in Balmorhea?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Balmorhea?
For Balmorhea, start with the Gomez Peak site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5775, 154.3325 MHz. Program a control channel first; the scanner finds the voice channels from it.