About Point Fire and EMS Frequencies
Quick answer: Fire dispatch for Point: Point Fire 37.2600 MHz, FM, no tone. County-level ems dispatch that covers Point: Rains County EMS 463.0500 MHz, narrow FM, 125 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Point conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Point Fire | Volunteer Fire | 37.2600 | FM | WRU976 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Point Fire | Volunteer Fire Primary | 155.2650 In 154.0700 | FMN | WPPV417 |
Rains County channels that also cover Point
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southwest Rains Volunteer Fire Department | Southwest Rains Volunteer Fire Department – Dispatch | 155.9625 In 158.7825 | FMN | WPYA958 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rains County EMS | Hopkins EMS Dispatch | 463.0500 In 468.0500 | 125 DPL | FMN | WZW962 |
Nearest trunked radio sites
Distances are measured from the center of Point.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Point?
Fire dispatch channels listed for Point: Point Fire 37.2600 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Point?
We do not have a EMS dispatch channel listed specifically for Point. The county-level EMS dispatch channels in the same county: Rains County EMS 463.0500 MHz, narrow FM, 125 DPL.
What scanner do I need to listen to fire and EMS in Point?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Point?
For Point, start with the Lake Tawakoni site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 771.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Point fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Point are marked encrypted.