Skip to content

Emory Fire and EMS Frequencies

Emory in Rains County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Lake Fork (North Texas Interoperable Radio Network (NTIRN)), about 10 miles away.

About Emory Fire and EMS Frequencies

Quick answer: Fire dispatch for Emory: Emory Fire 154.2350 MHz, P25, NAC 172. County-level ems dispatch that covers Emory: Rains County EMS 463.0500 MHz, narrow FM, 125 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Emory conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Emory
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emory FireEmory Fire – Dispatch (includes Point Fire Department)154.2350
In 150.7750
NAC 172P25WPKT376

Rains County channels that also cover Emory

Fire Dispatch

Fire Dispatch frequencies for Rains County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Southwest Rains Volunteer Fire DepartmentSouthwest Rains Volunteer Fire Department – Dispatch155.9625
In 158.7825
FMNWPYA958

EMS Dispatch

EMS Dispatch frequencies for Rains County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rains County EMSHopkins EMS Dispatch463.0500
In 468.0500
125 DPLFMNWZW962

Nearest trunked radio sites

Distances are measured from the center of Emory.

Lake Fork · North Texas Interoperable Radio Network (NTIRN)
RFSS 3 · Site 52 (hex 34) · NAC 442 · about 10 mi away
Control 770.09375
Lake Tawakoni · North Texas Interoperable Radio Network (NTIRN)
RFSS 3 · Site 51 (hex 33) · NAC 441 · about 14 mi away
Control 771.00625
South County · Hunt County P25
Project 25 · RFSS 10 · Site 10 (hex A) · NAC A · about 21 mi away
Control 769.79375, 771.04375, 772.28125, 774.91875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Emory?

Fire dispatch channels listed for Emory: Emory Fire 154.2350 MHz, P25, NAC 172.

What frequency does EMS or the ambulance service use in Emory?

We do not have a EMS dispatch channel listed specifically for Emory. The county-level EMS dispatch channels in the same county: Rains County EMS 463.0500 MHz, narrow FM, 125 DPL.

What scanner do I need to listen to fire and EMS in Emory?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Emory?

For Emory, start with the Lake Fork site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 770.09375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Emory fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Emory are marked encrypted.