Skip to content

Pecos County Fire and EMS Frequencies

Pecos County in Texas has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Pecos County Fire and EMS Frequencies

Quick answer: EMS dispatch for Pecos County: Pecos County EMS 155.8425 MHz, P25, NAC 186.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Pecos County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Pecos County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pecos County EMSPecos County EMS – Dispatch – Iraan Tower155.8425
In 153.9200
NAC 186P25WQIQ413
Pecos County EMSPecos County EMS – Dispatch – Fort Stockton Tower155.9250
In 153.8375
88.5 PLFMNWQIQ413

Radio system sites in Pecos County

Program the control channel first; your scanner finds the voice channels from it.

Coates Ranch (Iraan) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 82 (hex 52)
Control 152.5025, 152.7575
Voice 151.1525, 151.4975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pecos County

Common questions

What frequency does EMS or the ambulance service use in Pecos County?

EMS dispatch channels listed for Pecos County: Pecos County EMS 155.8425 MHz, P25, NAC 186.

What scanner do I need to listen to fire and EMS in Pecos County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Pecos County?

For Pecos County, start with the Coates Ranch (Iraan) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5025, 152.7575 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pecos County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Pecos County are marked encrypted.