About Sheffield Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Sheffield: Pecos County EMS 155.8425 MHz, P25, NAC 186.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Pecos County channels that also cover Sheffield
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pecos County EMS | Pecos County EMS – Dispatch – Iraan Tower | 155.8425 In 153.9200 | NAC 186 | P25 | WQIQ413 |
| Pecos County EMS | Pecos County EMS – Dispatch – Fort Stockton Tower | 155.9250 In 153.8375 | 88.5 PL | FMN | WQIQ413 |
Nearest trunked radio sites
Distances are measured from the center of Sheffield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Sheffield?
We do not have a EMS dispatch channel listed specifically for Sheffield. The county-level EMS dispatch channels in the same county: Pecos County EMS 155.8425 MHz, P25, NAC 186.
What scanner do I need to listen to fire and EMS in Sheffield?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Sheffield?
For Sheffield, start with the Coates Ranch (Iraan) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5025, 152.7575 MHz. Program a control channel first; the scanner finds the voice channels from it.