About Naples Fire and EMS Frequencies
Quick answer: Fire dispatch for Naples: Naples Fire 154.1600 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Naples: Morris County EMS 451.9750 MHz, narrow FM, 114 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Naples conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Naples Fire | Naples Fire – Dispatch | 154.1600 In 159.1050 | 151.4 PL | FMN | WNJX708 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Naples Fire | Naples Fire – Fire Ground | 158.8200 | FMN | KRD470 |
Morris County channels that also cover Naples
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morris County Fire | Fire Tone Outs (all Fire Department's except Daingerfield) | 154.4300 | 151.4 PL | FMN | WNVN291 |
| Rocky Branch Fire Department | Repeater | 159.3900 In 156.0000 | FMN | WQES643 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rocky Branch Fire Department | Rocky Branch Fire Department – Fire Ground | 154.1450 | FMN | WNGA726 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morris County EMS | Christus EMS Daingerfield Repeater | 451.9750 In 456.9750 | 114 DPL | FMN | WQBN566 |
Nearest trunked radio sites
Distances are measured from the center of Naples.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Naples?
Fire dispatch channels listed for Naples: Naples Fire 154.1600 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Naples?
We do not have a EMS dispatch channel listed specifically for Naples. The county-level EMS dispatch channels in the same county: Morris County EMS 451.9750 MHz, narrow FM, 114 DPL.
What scanner do I need to listen to fire and EMS in Naples?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Naples?
For Naples, start with the Mount Pleasant site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.51875, 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Naples fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Naples are marked encrypted.