Mart also extends into Limestone County.
About Mart Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mart: McLennan County Fire 154.4150 MHz, FM, 100.0 PL. Trunked: Heart of Texas Regional Radio System (HOTRRS), for example American Medical Response EMS talkgroup 400 (hex 190).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Heart of Texas Regional Radio System (HOTRRS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mart, start with the Waco site of Lacy-Lakeview Public Services System, about 17 miles away. Its control channels: 155.055, 159.15, 159.2475 MHz.
Data updated .
McLennan County channels that also cover Mart
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McLennan County Fire | McLennan County Fire – Dispatch | 154.4150 In 153.8900 | 100.0 PL | FM | WQAU346 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Providence Health Center | EMS to Providence Hospital | 463.1250 In 468.1250 | 123.0 PL | FM | KNCE317 |
Heart of Texas Regional Radio System (HOTRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| American Medical Response EMS | McLennan Co Rural Volunteer Fire Department Dispatch (by AMR) | 400 | 190 | D |
| American Medical Response EMS | City of West EMS Dispatch (by AMR) | 263 | 107 | D |
| American Medical Response EMS | American Medical Response EMS – Tactical Channel | 259 | 103 | D |
| American Medical Response EMS | American Medical Response EMS – Tactical Channel | 260 | 104 | D |
| American Medical Response EMS | Hillcrest ER | 261 | 105 | D |
| American Medical Response EMS | Providence ER | 262 | 106 | D |
Nearest trunked radio sites
Distances are measured from the center of Mart.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mart?
We do not have a fire dispatch channel listed specifically for Mart. The county-level fire dispatch channels in the same county: McLennan County Fire 154.4150 MHz, FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Mart?
Yes. The county-level systems that cover Mart are Fire and EMS talkgroups are listed for Heart of Texas Regional Radio System (HOTRRS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mart?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mart?
For Mart, start with the Waco site of Lacy-Lakeview Public Services System. Its control channels are 155.055, 159.15, 159.2475 MHz. Program a control channel first; the scanner finds the voice channels from it.