Skip to content

Mart Fire and EMS Frequencies

We do not have frequencies listed specifically for Mart in Limestone County, Texas yet. Countywide channels for Limestone County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waco (Lacy-Lakeview Public Services System), about 17 miles away.

About Mart Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mart: Limestone County Fire 154.1600 MHz, narrow FM, 100.0 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Limestone County channels that also cover Mart

Fire Dispatch

Fire Dispatch frequencies for Limestone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Limestone County FireFire/EMS Primary (includes Mexia EMS)154.1600
In 159.0000
100.0 PLFMNWPHM569

EMS Tactical

EMS Tactical frequencies for Limestone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Limestone County EMSRepeater151.2350
In 156.0450
506 DPLFMNWPHM569
Limestone County EMSLimestone Medical Center EMS155.4000FMN—

Nearest trunked radio sites

Distances are measured from the center of Mart.

Waco · Lacy-Lakeview Public Services System
RFSS 1 · Site 1 (hex 1) · NAC 3C1 · about 17 mi away
Control 155.055, 159.15, 159.2475
Voice 154.355
Waco Simulcast · Heart of Texas Regional Radio System (HOTRRS)
RFSS 1 · Site 2 (hex 2) · NAC 572 · about 21 mi away
Control 857.2125, 857.2625, 858.2125, 859.2125
Voice 854.0125, 855.2125, 855.2375, 856.2125, 856.2375, 856.7625, 856.9375, 857.7625, 858.7625
Hillsboro · Hill County
RFSS 1 · Site 1 (hex 1) · NAC B · about 36 mi away
Control 854.1375, 856.0125, 857.0125, 858.0125
Voice 854.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mart?

We do not have a fire dispatch channel listed specifically for Mart. The county-level fire dispatch channels in the same county: Limestone County Fire 154.1600 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Mart?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mart?

For Mart, start with the Waco site of Lacy-Lakeview Public Services System. Its control channels are 155.055, 159.15, 159.2475 MHz. Program a control channel first; the scanner finds the voice channels from it.