Skip to content

McLennan County Fire and EMS Frequencies

McLennan County in Texas has 2 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About McLennan County Fire and EMS Frequencies

Quick answer: Fire dispatch for McLennan County: McLennan County Fire 154.4150 MHz, FM, 100.0 PL. Trunked: Heart of Texas Regional Radio System (HOTRRS), for example American Medical Response EMS talkgroup 400 (hex 190).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Heart of Texas Regional Radio System (HOTRRS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McLennan County, start with the Waco Simulcast site of Heart of Texas Regional Radio System (HOTRRS). Its control channels: 857.2125, 857.2625, 858.2125 MHz.

Data updated .

McLennan County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McLennan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLennan County FireMcLennan County Fire – Dispatch154.4150
In 153.8900
100.0 PLFMWQAU346

Hospitals & Medical

Hospitals & Medical frequencies for McLennan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Providence Health CenterEMS to Providence Hospital463.1250
In 468.1250
123.0 PLFMKNCE317

McLennan County trunked talkgroups

Heart of Texas Regional Radio System (HOTRRS)

Heart of Texas Regional Radio System (HOTRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
American Medical Response EMSMcLennan Co Rural Volunteer Fire Department Dispatch (by AMR)400190D
American Medical Response EMSCity of West EMS Dispatch (by AMR)263107D
American Medical Response EMSAmerican Medical Response EMS – Tactical Channel259103D
American Medical Response EMSAmerican Medical Response EMS – Tactical Channel260104D
American Medical Response EMSHillcrest ER261105D
American Medical Response EMSProvidence ER262106D

Radio system sites in McLennan County

Program the control channel first; your scanner finds the voice channels from it.

Waco Simulcast · Heart of Texas Regional Radio System (HOTRRS)
RFSS 1 · Site 2 (hex 2) · NAC 572
Control 857.2125, 857.2625, 858.2125, 859.2125
Voice 854.0125, 855.2125, 855.2375, 856.2125, 856.2375, 856.7625, 856.9375, 857.7625, 858.7625
Waco · Lacy-Lakeview Public Services System
RFSS 1 · Site 1 (hex 1) · NAC 3C1
Control 155.055, 159.15, 159.2475
Voice 154.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McLennan County

Common questions

What frequency does the fire department use in McLennan County?

Fire dispatch channels listed for McLennan County: McLennan County Fire 154.4150 MHz, FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in McLennan County?

Yes. Fire and EMS talkgroups are listed for Heart of Texas Regional Radio System (HOTRRS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McLennan County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McLennan County?

For McLennan County, start with the Waco Simulcast site of Heart of Texas Regional Radio System (HOTRRS). Its control channels are 857.2125, 857.2625, 858.2125, 859.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McLennan County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for McLennan County are marked encrypted.

Are McLennan County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for McLennan County are marked encrypted.