Skip to content

Pine Harbor Fire and EMS Frequencies

We do not have frequencies listed specifically for Pine Harbor in Marion County, Texas yet. Countywide channels for Marion County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Marshall (Marshall), about 18 miles away.

About Pine Harbor Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pine Harbor: Marion County Fire 154.4150 MHz, narrow FM, 141.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Marion County channels that also cover Pine Harbor

Fire Dispatch

Fire Dispatch frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marion County FireFire Primary154.4150
In 153.8300
141.3 PLFMNWNNA338

Nearest trunked radio sites

Distances are measured from the center of Pine Harbor.

Marshall · Marshall
Site 1 (hex 1) · about 18 mi away
Control 155.325
Voice 155.115, 155.8725, 156.2175, 158.8125
Gilmer · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 31 (hex 1F) · NAC 1A1 · about 21 mi away
Control 771.98125, 772.45625
Voice 770.11875, 771.38125, 771.73125
Longview · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 42 (hex 2A) · NAC 1A0 · about 23 mi away
Control 858.7625, 858.9375, 859.7625, 859.9375
Voice 854.2875, 854.7125, 855.2125, 856.7625, 857.7625, 857.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pine Harbor?

We do not have a fire dispatch channel listed specifically for Pine Harbor. The county-level fire dispatch channels in the same county: Marion County Fire 154.4150 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Pine Harbor?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pine Harbor?

For Pine Harbor, start with the Marshall site of Marshall. Its control channels are 155.325 MHz. Program a control channel first; the scanner finds the voice channels from it.