About Marshall Fire and EMS Frequencies
Quick answer: Fire dispatch for Marshall: Marshall Fire 154.1150 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Marshall: Harrison County EMS 463.3125 MHz, narrow FM, 343 DPL. Trunked: Marshall, for example Marshall Fire/EMS talkgroup 11 (hex b).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Marshall: 1 talkgroup; Marshall: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marshall, start with the Marshall site of Marshall, about 0 miles away. Its control channels: 155.325 MHz.
Data updated .
Marshall conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall Fire | Fire/EMS Dispatch | 154.1150 In 153.7400 | 141.3 PL | FMN | WXT749 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall Fire | EMS to Hospital | 155.0850 In 153.9050 | 141.3 PL | FMN | WPPH752 |
Marshall trunked talkgroups
Marshall
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Marshall Fire/EMS | Marshall Fire/EMS – Dispatch | 11 | b | T |
Harrison County channels that also cover Marshall
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harrison County Fire | Fire District 2 Dispatch | 151.0400 In 158.9250 | FMN | WPAM420 | |
| Harrison County Fire | Harrison County Fire – Dispatch | 154.3400 In 153.7700 | 156.7 PL | FMN | KNGS982 |
| West Harrison Fire Department | West Harrison Fire Department – Dispatch | 154.2050 In 155.2950 | NAC 162 | P25 | WQCJ937 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harrison County EMS | Christus EMS Marshall Repeater | 463.3125 In 468.3125 | 343 DPL | FMN | WPUZ708 |
Marshall
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Harrison County Fire | Fire/EMS Dispatch (154.340 Linked) | 26 | 1a | T |
Nearest trunked radio sites
Distances are measured from the center of Marshall.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marshall?
Fire dispatch channels listed for Marshall: Marshall Fire 154.1150 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Marshall?
We do not have a EMS dispatch channel listed specifically for Marshall. The county-level EMS dispatch channels in the same county: Harrison County EMS 463.3125 MHz, narrow FM, 343 DPL.
Do fire departments and EMS use a trunked radio system in Marshall?
Yes. Fire and EMS talkgroups are listed for Marshall: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marshall?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marshall?
For Marshall, start with the Marshall site of Marshall. Its control channels are 155.325 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Marshall fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Marshall are marked encrypted.
Are Marshall fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Marshall are marked encrypted.