About Hallettsville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hallettsville: Lavaca County Fire 155.1375 MHz, P25, NAC 7C2. County-level ems dispatch that covers Hallettsville: Lavaca County EMS 155.9700 MHz, P25, NAC 7C3. Trunked: Texas Wide Area Radio Network (TxWARN), for example Lavaca County Fire talkgroup 976 (hex 3d0).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hallettsville, start with the Lavaca County Simulcast site of Texas Wide Area Radio Network (TxWARN), about 4 miles away. Its control channels: 859.5, 859.975 MHz.
Data updated .
Hallettsville conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hallettsville Fire | Hallettsville Fire – Tactical Channel | 154.2050 | 107.2 PL | FMN | — |
Lavaca County channels that also cover Hallettsville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lavaca County Fire | Lavaca County Fire – Dispatch | 155.1375 In 154.6575 | NAC 7C2 | P25 | WREW650 |
| Lavaca County Fire | Lavaca County Fire – Dispatch | 158.7975 In 159.0825 | 107.2 PL | FMN | WQAW527 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lavaca County EMS | Lavaca County EMS – Dispatch | 155.9700 In 159.0375 | NAC 7C3 | P25 | WQAW527 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lavaca County Fire | Lavaca County Fire – Dispatch | 976 | 3d0 | D |
| Lavaca County Fire | Lavaca County Fire – Tactical Channel | 978 | 3d2 | D |
| Lavaca County Fire | Lavaca County Fire – Tactical Channel | 980 | 3d4 | D |
| Lavaca County Fire | Lavaca County Fire – Tactical Channel | 982 | 3d6 | D |
| Lavaca County EMS | Lavaca County EMS – Dispatch | 984 | 3d8 | D |
| Lavaca County EMS | Lavaca County EMS – Tactical Channel | 2965 | b95 | D |
Nearest trunked radio sites
Distances are measured from the center of Hallettsville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hallettsville?
We do not have a fire dispatch channel listed specifically for Hallettsville. The county-level fire dispatch channels in the same county: Lavaca County Fire 155.1375 MHz, P25, NAC 7C2.
What frequency does EMS or the ambulance service use in Hallettsville?
We do not have a EMS dispatch channel listed specifically for Hallettsville. The county-level EMS dispatch channels in the same county: Lavaca County EMS 155.9700 MHz, P25, NAC 7C3.
Do fire departments and EMS use a trunked radio system in Hallettsville?
Yes. The county-level systems that cover Hallettsville are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hallettsville?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hallettsville?
For Hallettsville, start with the Lavaca County Simulcast site of Texas Wide Area Radio Network (TxWARN). Its control channels are 859.5, 859.975 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hallettsville fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Hallettsville are marked encrypted.