Skip to content

Sumner Fire and EMS Frequencies

We do not have frequencies listed specifically for Sumner in Lamar County, Texas yet. Countywide channels for Lamar County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Denison Simulcast (Denison P25), about 47 miles away.

About Sumner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sumner: Lamar County Fire 154.9800 MHz, narrow FM, 186.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lamar County channels that also cover Sumner

Fire Dispatch

Fire Dispatch frequencies for Lamar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lamar County FireLamar County Fire – Dispatch / Voice Pager (Sheriff Ch. 6A/6B)154.9800
In 155.9550
186.2 PLFMNKKV670

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lamar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lamar County FireLamar County Fire – Fire Ground (Dispatch & Operations)154.7475
In 155.8575
411 DPLFMNWRAB364
Lamar County FireLamar County Fire – Fire Ground (Dispatch & Operations)155.5875
In 153.8675
203.5 PLFMNWRAB364

Hospitals & Medical

Hospitals & Medical frequencies for Lamar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Paris Regional Medical CenterAmbulance to Hospital463.1000
In 468.1000
261 DPLFMNKNDY236

Nearest trunked radio sites

Distances are measured from the center of Sumner.

Denison Simulcast · Denison P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C81 · about 47 mi away
Control 772.75625, 773.88125, 774.88125
Voice 771.68125
Northwest County · Hunt County P25
Project 25 · RFSS 26 · Site 26 (hex 1A) · NAC 1A · about 47 mi away
Control 770.79375, 771.51875, 772.94375, 773.46875
Greenville · Greenville P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC BE1 · about 50 mi away
Control 770.75625, 771.30625, 772.36875, 773.19375
Voice 773.63125, 774.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sumner?

We do not have a fire dispatch channel listed specifically for Sumner. The county-level fire dispatch channels in the same county: Lamar County Fire 154.9800 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Sumner?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sumner?

For Sumner, start with the Denison Simulcast site of Denison P25. Its control channels are 772.75625, 773.88125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.