About Powderly Fire and EMS Frequencies
Quick answer: Fire dispatch for Powderly: Powderly VFD Fire 154.2350 MHz, narrow FM, 186.2 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Powderly conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Powderly VFD Fire | Fire Operations | 154.2350 | 186.2 PL | FMN | KNDH937 |
Lamar County channels that also cover Powderly
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lamar County Fire | Lamar County Fire – Dispatch / Voice Pager (Sheriff Ch. 6A/6B) | 154.9800 In 155.9550 | 186.2 PL | FMN | KKV670 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lamar County Fire | Lamar County Fire – Fire Ground (Dispatch & Operations) | 154.7475 In 155.8575 | 411 DPL | FMN | WRAB364 |
| Lamar County Fire | Lamar County Fire – Fire Ground (Dispatch & Operations) | 155.5875 In 153.8675 | 203.5 PL | FMN | WRAB364 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Paris Regional Medical Center | Ambulance to Hospital | 463.1000 In 468.1000 | 261 DPL | FMN | KNDY236 |
Nearest trunked radio sites
Distances are measured from the center of Powderly.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Powderly?
Fire dispatch channels listed for Powderly: Powderly VFD Fire 154.2350 MHz, narrow FM, 186.2 PL.
What scanner do I need to listen to fire and EMS in Powderly?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Powderly?
For Powderly, start with the Mount Pleasant site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.51875, 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Powderly fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Powderly are marked encrypted.