Skip to content

Kerr County Fire and EMS Frequencies

Kerr County in Texas has 4 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Kerr County Fire and EMS Frequencies

Quick answer: Fire dispatch for Kerr County: Kerr County Fire 155.7975 MHz, narrow FM, 365 DPL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Kerr County Fire talkgroup 46330 (hex b4fa).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kerr County, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 155.385, 155.55 MHz.

Data updated .

Kerr County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Kerr County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kerr County FireFirecom East155.7975
In 151.4975
365 DPLFMNWQNL894
Kerr County FireFirecom West156.1800
In 154.3850
365 DPLFMNWQNL894
Kerr County FireFirecom Central159.1350
In 154.6500
365 DPLFMNWQNL894

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Kerr County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Turtle Creek VFD FireTurtle Creek Volunteer Fire Department Fire – Tactical Channel / Operations154.3250
In 150.7750
FMWPKI374

Kerr County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Kerr County FireKerr County Fire – Dispatch46330b4faD
Kerr County FireFire Operations46331b4fbD
Kerr County FireFire Operations46332b4fcD
Kerr County FireFire Operations46333b4fdD
Kerr County FireFire Operations46334b4feD
Kerr County FireFire Operations46335b4ffD
Kerr County FireFire Operations46336b500D
Kerr County FireFire Operations46337b501D

Radio system sites in Kerr County

Program the control channel first; your scanner finds the voice channels from it.

Kerr County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 22 (hex 16) · NAC 130
Control 155.385, 155.55
Voice 155.085, 155.235
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kerr County

Common questions

What frequency does the fire department use in Kerr County?

Fire dispatch channels listed for Kerr County: Kerr County Fire 155.7975 MHz, narrow FM, 365 DPL.

Do fire departments and EMS use a trunked radio system in Kerr County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kerr County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kerr County?

For Kerr County, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 155.385, 155.55 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kerr County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Kerr County are marked encrypted.

Are Kerr County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Kerr County are marked encrypted.