Skip to content

Gregg County Fire and EMS Frequencies

Gregg County in Texas has 6 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Gregg County Fire and EMS Frequencies

Quick answer: Fire dispatch for Gregg County: Clarksville/Warren City Fire 158.8200 MHz, narrow FM, 107.2 PL; Judson-Metro VFD Fire 151.3625 MHz, P25, NAC 293; Sabine Fire 154.1900 MHz, P25, NAC 293. EMS dispatch for Gregg County: Gregg County EMS 463.3750 MHz, narrow FM, no tone. Trunked: Texas Wide Area Radio Network (TxWARN), for example Gregg County Fire talkgroup 20077 (hex 4e6d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gregg County, start with the Kilgore site of Texas Wide Area Radio Network (TxWARN). Its control channels: 857.2375, 857.7375, 858.0625 MHz.

Data updated .

Gregg County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gregg County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clarksville/Warren City FireClarksville/Warren City Fire – Dispatch158.8200
In 153.8150
107.2 PLFMNWPRH344
Judson-Metro VFD FireJudson-Metro Volunteer Fire Department Fire – Dispatch151.3625
In 159.4575
NAC 293P25WQJY762
Sabine FireVolunteer Fire Dispatch (Digital)154.1900
In 151.2200
NAC 293P25WPUR731
Sabine FireVolunteer Fire Dispatch (Analog)154.1900
In 151.2200
107.2 PLFMNWPUR731

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gregg County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clarksville/Warren City FireClarksville/Warren City Fire – Tactical Channel158.8200
In 153.8150
P25WPRH344

EMS Dispatch

EMS Dispatch frequencies for Gregg County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gregg County EMSGregg County EMS – Dispatch463.3750FMN—

Gregg County trunked talkgroups

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Gregg County FireAirport Rescue and Fire Fighting (ARFF)200774e6dD

Radio system sites in Gregg County

Program the control channel first; your scanner finds the voice channels from it.

Kilgore · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 30 (hex 1E) · NAC 1A0
Control 857.2375, 857.7375, 858.0625, 858.4875
Voice 856.0375, 856.9625
Longview · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 42 (hex 2A) · NAC 1A0
Control 858.7625, 858.9375, 859.7625, 859.9375
Voice 854.2875, 854.7125, 855.2125, 856.7625, 857.7625, 857.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Gregg County

Common questions

What frequency does the fire department use in Gregg County?

Fire dispatch channels listed for Gregg County: Clarksville/Warren City Fire 158.8200 MHz, narrow FM, 107.2 PL; Judson-Metro VFD Fire 151.3625 MHz, P25, NAC 293; Sabine Fire 154.1900 MHz, P25, NAC 293.

What frequency does EMS or the ambulance service use in Gregg County?

EMS dispatch channels listed for Gregg County: Gregg County EMS 463.3750 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Gregg County?

Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gregg County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gregg County?

For Gregg County, start with the Kilgore site of Texas Wide Area Radio Network (TxWARN). Its control channels are 857.2375, 857.7375, 858.0625, 858.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gregg County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Gregg County are marked encrypted.

Are Gregg County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Gregg County are marked encrypted.