About Longview Fire and EMS Frequencies
Quick answer: Fire dispatch for Longview: Longview Fire 154.4300 MHz, narrow FM, 351 DPL. EMS dispatch for Longview: Longview EMS 463.3750 MHz, narrow FM, 464 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Longview Fire talkgroup 2626 (hex a42).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 14 talkgroups; Texas Wide Area Radio Network (TxWARN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Longview, start with the Longview site of Texas Wide Area Radio Network (TxWARN), about 2 miles away. Its control channels: 858.7625, 858.9375, 859.7625 MHz.
- 7 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Longview conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Longview Fire | Fire Mutual Aid | 154.4300 In 153.9500 | 351 DPL | FMN | WXY590 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Longview Fire | Fire Knox Box release (DTMF) | 857.2625 In 812.2625 | 136.5 PL | FM | WQJG290 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Longview Fire | Fire Training | 154.3550 | FMN | WQNX527 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Longview EMS | Christus EMS – Longview Tower | 463.3750 In 468.3750 | 464 DPL | FMN | WPVY498 |
Longview trunked talkgroups
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Longview Fire | Longview Fire – Dispatch | 2626 | a42 | D |
| Longview Fire | Fire Announcement | 3608 | e18 | D |
| Longview Fire | Fire Prevention | 2630 | a46 | D |
| Longview Fire | Fire Talk | 2634 | a4a | D |
| Longview Fire | Fire Mutual Aid | 2642 | a52 | D |
| Longview Hospital | EMS to Longview Regional Medical Center | 2674 | a72 | D |
| Longview Hospital | EMS to Good Shepherd Medical Center | 2676 | a74 | D |
7 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Longview Fire | Longview Fire – Dispatch | 2624 | a40 | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2628 | a44 | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2632 | a48 | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2636 | a4c | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2638 | a4e | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2640 | a50 | D Encrypted |
| Longview Fire | Longview Fire – Fire Ground | 2644 | a54 | D Encrypted |
Gregg County channels that also cover Longview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clarksville/Warren City Fire | Clarksville/Warren City Fire – Dispatch | 158.8200 In 153.8150 | 107.2 PL | FMN | WPRH344 |
| Judson-Metro VFD Fire | Judson-Metro Volunteer Fire Department Fire – Dispatch | 151.3625 In 159.4575 | NAC 293 | P25 | WQJY762 |
| Sabine Fire | Volunteer Fire Dispatch (Digital) | 154.1900 In 151.2200 | NAC 293 | P25 | WPUR731 |
| Sabine Fire | Volunteer Fire Dispatch (Analog) | 154.1900 In 151.2200 | 107.2 PL | FMN | WPUR731 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clarksville/Warren City Fire | Clarksville/Warren City Fire – Tactical Channel | 158.8200 In 153.8150 | P25 | WPRH344 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gregg County EMS | Gregg County EMS – Dispatch | 463.3750 | FMN | — |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gregg County Fire | Airport Rescue and Fire Fighting (ARFF) | 20077 | 4e6d | D |
Nearest trunked radio sites
Distances are measured from the center of Longview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Longview?
Fire dispatch channels listed for Longview: Longview Fire 154.4300 MHz, narrow FM, 351 DPL.
What frequency does EMS or the ambulance service use in Longview?
EMS dispatch channels listed for Longview: Longview EMS 463.3750 MHz, narrow FM, 464 DPL.
Do fire departments and EMS use a trunked radio system in Longview?
Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Longview?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Longview?
For Longview, start with the Longview site of Texas Wide Area Radio Network (TxWARN). Its control channels are 858.7625, 858.9375, 859.7625, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Longview fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Longview are marked encrypted.
Are Longview fire and EMS talkgroups encrypted?
7 of the 14 talkgroups listed for Longview are marked fully or partly encrypted; a scanner cannot decode encrypted audio.