Skip to content

Grayson County Fire and EMS Frequencies

Grayson County in Texas has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 23 cities and communities below for local fire departments and EMS agencies.

About Grayson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Grayson County: Grayson County Fire 154.7850 MHz, P25, NAC 179; Howe City Services Fire 155.8200 MHz, narrow FM, 156.7 PL; Locust VFD Fire 154.4000 MHz, narrow FM, 118.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Grayson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grayson County FireGrayson County Fire – Dispatch154.7850
In 155.8500
NAC 179P25KNFL698
Howe City Services FireHowe Police Department / Fire Department / City sevices155.8200
In 154.9800
156.7 PLFMNWPWZ469
Locust VFD FireLocust Volunteer Fire Department Fire – Dispatch154.4000
In 159.1800
118.8 PLFMNWPPW515
Pottsboro PD / FD FirePottsboro Police Department / Fire Department Fire – Dispatch158.8950CSQFMN—
Preston Volunteer Emergency ServicesFire/EMS Dispatch155.8125
In 153.9875
110.9 PLFMNWPVY660
Van Alstyne Fire & PoliceVan Alstyne Fire & Police – Dispatch771.0563
In 801.0563
NAC 091P25 EncryptedWRNM609

Radio system sites in Grayson County

Program the control channel first; your scanner finds the voice channels from it.

Denison Simulcast · Denison P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C81
Control 772.75625, 773.88125, 774.88125
Voice 771.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Grayson County

Common questions

What frequency does the fire department use in Grayson County?

Fire dispatch channels listed for Grayson County: Grayson County Fire 154.7850 MHz, P25, NAC 179; Howe City Services Fire 155.8200 MHz, narrow FM, 156.7 PL; Locust VFD Fire 154.4000 MHz, narrow FM, 118.8 PL; Pottsboro PD / FD Fire 158.8950 MHz, narrow FM, CSQ; Preston Volunteer Emergency Services 155.8125 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Grayson County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Grayson County?

For Grayson County, start with the Denison Simulcast site of Denison P25. Its control channels are 772.75625, 773.88125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grayson County fire and EMS frequencies encrypted?

1 of the 6 conventional frequencies listed for Grayson County are marked encrypted; a scanner cannot decode encrypted audio.