About Denison Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Denison: Grayson County Fire 154.7850 MHz, P25, NAC 179; Howe City Services Fire 155.8200 MHz, narrow FM, 156.7 PL; Locust VFD Fire 154.4000 MHz, narrow FM, 118.8 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Denison P25 (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Denison, start with the Denison Simulcast site of Denison P25, about 3 miles away. Its control channels: 772.75625, 773.88125, 774.88125 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Denison conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Denison FD Fire | Denison Fire Department Fire – Dispatch | 154.1450 In 158.9250 | NAC 700 | P25 Encrypted | KNBF402 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Denison FD Fire | Denison Fire Department Fire – Tactical Channel | 151.1975 | NAC 300 | P25 | KNBF402 |
| Denison FD Fire | Denison Fire Department Fire – Tactical Channel | 156.0825 | NAC 300 | P25 | KNBF402 |
Denison trunked talkgroups
Denison P25
Project 25
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Denison Fire | Denison Fire – Dispatch | 8 | 8 | T Encrypted |
Grayson County channels that also cover Denison
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grayson County Fire | Grayson County Fire – Dispatch | 154.7850 In 155.8500 | NAC 179 | P25 | KNFL698 |
| Howe City Services Fire | Howe Police Department / Fire Department / City sevices | 155.8200 In 154.9800 | 156.7 PL | FMN | WPWZ469 |
| Locust VFD Fire | Locust Volunteer Fire Department Fire – Dispatch | 154.4000 In 159.1800 | 118.8 PL | FMN | WPPW515 |
| Pottsboro PD / FD Fire | Pottsboro Police Department / Fire Department Fire – Dispatch | 158.8950 | CSQ | FMN | — |
| Preston Volunteer Emergency Services | Fire/EMS Dispatch | 155.8125 In 153.9875 | 110.9 PL | FMN | WPVY660 |
| Van Alstyne Fire & Police | Van Alstyne Fire & Police – Dispatch | 771.0563 In 801.0563 | NAC 091 | P25 Encrypted | WRNM609 |
Nearest trunked radio sites
Distances are measured from the center of Denison.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Denison?
We do not have a fire dispatch channel listed specifically for Denison. The county-level fire dispatch channels in the same county: Grayson County Fire 154.7850 MHz, P25, NAC 179; Howe City Services Fire 155.8200 MHz, narrow FM, 156.7 PL; Locust VFD Fire 154.4000 MHz, narrow FM, 118.8 PL; Pottsboro PD / FD Fire 158.8950 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Denison?
Yes. Fire and EMS talkgroups are listed for Denison P25 (Project 25): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Denison?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Denison?
For Denison, start with the Denison Simulcast site of Denison P25. Its control channels are 772.75625, 773.88125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Denison fire and EMS frequencies encrypted?
1 of the 3 conventional frequencies listed for Denison are marked encrypted; a scanner cannot decode encrypted audio.
Are Denison fire and EMS talkgroups encrypted?
1 of the 1 talkgroups listed for Denison are marked fully or partly encrypted; a scanner cannot decode encrypted audio.