Skip to content

Gillespie County Fire and EMS Frequencies

Gillespie County in Texas has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Gillespie County Fire and EMS Frequencies

Quick answer: Fire dispatch for Gillespie County: Gillespie County Fire 154.0325 MHz, narrow FM, 179.9 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Gillespie County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gillespie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gillespie County FireFire/EMS West Repeater154.0325
In 150.8050
179.9 PLFMNWQEL268
Gillespie County FireFire/EMS Dispatch Central Repeater154.4450
In 153.8900
162.2 PLFMNWNLN713
Gillespie County FireFire/EMS East Repeater155.8875
In 153.9425
162.2 PLFMNWQEL268

Radio system sites in Gillespie County

Program the control channel first; your scanner finds the voice channels from it.

Stonewall · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 64 (hex 40) · NAC 130
Control 151.0475, 151.49
Voice 159.4725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Gillespie County

Common questions

What frequency does the fire department use in Gillespie County?

Fire dispatch channels listed for Gillespie County: Gillespie County Fire 154.0325 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Gillespie County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Gillespie County?

For Gillespie County, start with the Stonewall site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.0475, 151.49 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gillespie County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Gillespie County are marked encrypted.