Skip to content

Plum Fire and EMS Frequencies

We do not have frequencies listed specifically for Plum in Fayette County, Texas yet. Countywide channels for Fayette County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fayette County (Greater Austin/Travis Regional Radio System (GATRRS)), about 11 miles away.

About Plum Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Plum: Fayette County Fire 154.4300 MHz, narrow FM, 210.7 PL. County-level ems dispatch that covers Plum: Air Evac Lifeteam EMS 461.5750 MHz, narrow FM, 155 DPL; Fayette County EMS 462.9500 MHz, narrow FM, 110.9 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Fayette County channels that also cover Plum

Fire Dispatch

Fire Dispatch frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fayette County FireCounty Fire Primary154.4300
In 154.0100
210.7 PLFMNWPEQ744
Fayette County FireCounty Fire Primary154.7400
In 155.6550
210.7 PLFMNKVN672

EMS Dispatch

EMS Dispatch frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Lifeteam EMSOperations/Dispatch LaGrange Base461.5750
In 466.5750
155 DPLFMNWPIB671
Fayette County EMSCounty EMS Paging462.9500
In 467.9500
110.9 PLFMNKNAH399

Nearest trunked radio sites

Distances are measured from the center of Plum.

Fayette County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 8 (hex 8) · about 11 mi away
Control 852.05
Voice 851.7875, 852.475, 852.975
Lee County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 43 (hex 2B) · NAC 130 · about 16 mi away
Control 851.65, 853.475, 853.725
Voice 851.2, 852.4375
Bastrop Simulcast · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 40 (hex 28) · NAC 130 · about 23 mi away
Control 857.7125, 857.7625, 858.7125, 859.7125
Voice 851.2375, 851.55, 851.95, 852.2375, 854.0375, 856.7125, 857.2375, 858.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plum?

We do not have a fire dispatch channel listed specifically for Plum. The county-level fire dispatch channels in the same county: Fayette County Fire 154.4300 MHz, narrow FM, 210.7 PL.

What frequency does EMS or the ambulance service use in Plum?

We do not have a EMS dispatch channel listed specifically for Plum. The county-level EMS dispatch channels in the same county: Air Evac Lifeteam EMS 461.5750 MHz, narrow FM, 155 DPL; Fayette County EMS 462.9500 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Plum?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Plum?

For Plum, start with the Fayette County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 852.05 MHz. Program a control channel first; the scanner finds the voice channels from it.