About Fayette County Fire and EMS Frequencies
Quick answer: Fire dispatch for Fayette County: Fayette County Fire 154.4300 MHz, narrow FM, 210.7 PL. EMS dispatch for Fayette County: Air Evac Lifeteam EMS 461.5750 MHz, narrow FM, 155 DPL; Fayette County EMS 462.9500 MHz, narrow FM, 110.9 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Fayette County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | County Fire Primary | 154.4300 In 154.0100 | 210.7 PL | FMN | WPEQ744 |
| Fayette County Fire | County Fire Primary | 154.7400 In 155.6550 | 210.7 PL | FMN | KVN672 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Lifeteam EMS | Operations/Dispatch LaGrange Base | 461.5750 In 466.5750 | 155 DPL | FMN | WPIB671 |
| Fayette County EMS | County EMS Paging | 462.9500 In 467.9500 | 110.9 PL | FMN | KNAH399 |
Radio system sites in Fayette County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Fayette County
- Ammannsville
- Armstrong
- Bethany
- Bridge Valley
- Buckners Creek
- Burnhams Crossing
- Carmine
- Cedar
- Center Grove
- Cistern
- Colony
- Dubina
- Ellinger
- Elm Grove
- Engle
- Fayetteville
- Flatonia
- Floy
- Fords Prairie
- Franke
- Freyburg
- Halsted
- High Hill
- Holman
- Hostyn
- Indian Creek
- Ingrams Prairie
- Joiner
- Kirtley
- Kocicina
- La Grange
- Ledbetter
- Leevan
- Lena
- Lewis Settlement
- Live Oak Hill
- Lyons
- Manton Spring
- Marly
- Mecklenburg
- Middle Creek
- Millers Station
- Moravan
- Muldoon
- Mullins Prairie
- Nassau
- Navidad
- Nechanitz
- Oldenburg
- OQuinn
- Orizaba
- Oso
- Park
- Pecan
- Pin Oak
- Pine Springs
- Plum
- Praha
- Prairie Valley
- Rabbs Prairie
- Rek Hill
- Rocky Ridge
- Ross Prairie
- Round Top
- Roznov
- Rutersville
- Schulenburg
- Scott
- Sedan
- St. John
- Stellar
- Swiss Alp
- Tamberg
- Toledo
- Waldeck
- Walhalla
- Warda
- Warrenton
- Wendt
- West Point
- Willow Springs
- Winchester
- Winedale
- Woods Fort
- Wursten
- Zapalac
Common questions
What frequency does the fire department use in Fayette County?
Fire dispatch channels listed for Fayette County: Fayette County Fire 154.4300 MHz, narrow FM, 210.7 PL.
What frequency does EMS or the ambulance service use in Fayette County?
EMS dispatch channels listed for Fayette County: Air Evac Lifeteam EMS 461.5750 MHz, narrow FM, 155 DPL; Fayette County EMS 462.9500 MHz, narrow FM, 110.9 PL.
What scanner do I need to listen to fire and EMS in Fayette County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Fayette County?
For Fayette County, start with the Fayette County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 852.05 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Fayette County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Fayette County are marked encrypted.