Skip to content

Leonard Fire and EMS Frequencies

Leonard in Fannin County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Northwest County (Hunt County P25), about 16 miles away.

About Leonard Fire and EMS Frequencies

Quick answer: Fire dispatch for Leonard: Leonard Fire 158.8200 MHz, narrow FM, 143 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Leonard conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Leonard
AgencyDescriptionFrequency (MHz)ToneModeFCC
Leonard FireLeonard Police/Fire/Services158.8200143 DPLFMNWQPP961

Fannin County channels that also cover Leonard

Fire Dispatch

Fire Dispatch frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FirePrimary Paging & Dispatch154.4150
In 158.9850
172 DPLFMNWPYN387

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FireMutual Aid151.8200173.8 PLFMN—
Honey Gove FireFire Pagers/City Services154.3250243 DPLFMNWPKE621

Nearest trunked radio sites

Distances are measured from the center of Leonard.

Northwest County · Hunt County P25
Project 25 · RFSS 26 · Site 26 (hex 1A) · NAC 1A · about 16 mi away
Control 770.79375, 771.51875, 772.94375, 773.46875
Greenville · Greenville P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC BE1 · about 20 mi away
Control 770.75625, 771.30625, 772.36875, 773.19375
Voice 773.63125, 774.38125
NCTCOG Collin · Dallas P25 / NCTCOG
Project 25 · RFSS 1 · Site 21 (hex 15) · NAC 370 · about 24 mi away
Control 769.56875, 770.35625, 770.60625
Voice 769.31875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Leonard?

Fire dispatch channels listed for Leonard: Leonard Fire 158.8200 MHz, narrow FM, 143 DPL.

What scanner do I need to listen to fire and EMS in Leonard?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Leonard?

For Leonard, start with the Northwest County site of Hunt County P25. Its control channels are 770.79375, 771.51875, 772.94375, 773.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Leonard fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Leonard are marked encrypted.