Skip to content

Bonham Fire and EMS Frequencies

Bonham in Fannin County, Texas has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Denison Simulcast (Denison P25), about 23 miles away.

About Bonham Fire and EMS Frequencies

Quick answer: Fire dispatch for Bonham: Bonham Fire 154.8900 MHz, P25, NAC 509.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bonham conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bonham
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bonham FireFire 1 Dispatch154.8900
In 153.8150
NAC 509P25WNFA505
Bonham FireFire 1 Dispatch (Channel 2 Tactical, simplex)154.8900
In 153.8150
210.7 PLFMNWNFA505

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bonham
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bonham FireFire 3 Disaster154.0850131.8 PLFMNWNHR418

Fannin County channels that also cover Bonham

Fire Dispatch

Fire Dispatch frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FirePrimary Paging & Dispatch154.4150
In 158.9850
172 DPLFMNWPYN387

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FireMutual Aid151.8200173.8 PLFMN—
Honey Gove FireFire Pagers/City Services154.3250243 DPLFMNWPKE621

Nearest trunked radio sites

Distances are measured from the center of Bonham.

Denison Simulcast · Denison P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C81 · about 23 mi away
Control 772.75625, 773.88125, 774.88125
Voice 771.68125
Northwest County · Hunt County P25
Project 25 · RFSS 26 · Site 26 (hex 1A) · NAC 1A · about 29 mi away
Control 770.79375, 771.51875, 772.94375, 773.46875
Greenville · Greenville P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC BE1 · about 33 mi away
Control 770.75625, 771.30625, 772.36875, 773.19375
Voice 773.63125, 774.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bonham?

Fire dispatch channels listed for Bonham: Bonham Fire 154.8900 MHz, P25, NAC 509.

What scanner do I need to listen to fire and EMS in Bonham?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bonham?

For Bonham, start with the Denison Simulcast site of Denison P25. Its control channels are 772.75625, 773.88125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bonham fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Bonham are marked encrypted.