Skip to content

Dimmit County Fire and EMS Frequencies

Dimmit County in Texas has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Dimmit County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dimmit County: Dimmit County Fire 155.7900 MHz, narrow FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Dimmit County EMS talkgroup 4103 (hex 1007).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dimmit County, start with the Carrizo Springs site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 151.0475, 154.1075 MHz.

Data updated .

Dimmit County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dimmit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dimmit County FireFire/EMS Dispatch, Sheriff's Office Backup155.7900
In 154.7400
186.2 PLFMNWQO409

Dimmit County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dimmit County EMSDimmit County EMS – Dispatch41031007D

Radio system sites in Dimmit County

Program the control channel first; your scanner finds the voice channels from it.

Carrizo Springs · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 16 (hex 10) · NAC 136
Control 151.0475, 154.1075
Voice 155.2425, 155.7675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dimmit County

Common questions

What frequency does the fire department use in Dimmit County?

Fire dispatch channels listed for Dimmit County: Dimmit County Fire 155.7900 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Dimmit County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dimmit County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dimmit County?

For Dimmit County, start with the Carrizo Springs site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.0475, 154.1075 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dimmit County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Dimmit County are marked encrypted.

Are Dimmit County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Dimmit County are marked encrypted.