About Brundage Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Brundage: Dimmit County Fire 155.7900 MHz, narrow FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Dimmit County EMS talkgroup 4103 (hex 1007).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brundage, start with the Carrizo Springs site of Greater Austin/Travis Regional Radio System (GATRRS), about 11 miles away. Its control channels: 151.0475, 154.1075 MHz.
Data updated .
Dimmit County channels that also cover Brundage
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dimmit County Fire | Fire/EMS Dispatch, Sheriff's Office Backup | 155.7900 In 154.7400 | 186.2 PL | FMN | WQO409 |
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dimmit County EMS | Dimmit County EMS – Dispatch | 4103 | 1007 | D |
Nearest trunked radio sites
Distances are measured from the center of Brundage.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brundage?
We do not have a fire dispatch channel listed specifically for Brundage. The county-level fire dispatch channels in the same county: Dimmit County Fire 155.7900 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Brundage?
Yes. The county-level systems that cover Brundage are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Brundage?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brundage?
For Brundage, start with the Carrizo Springs site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.0475, 154.1075 MHz. Program a control channel first; the scanner finds the voice channels from it.