About Dalhart Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dalhart: Dallam County Fire 154.3550 MHz, narrow FM, 371 DPL. County-level ems dispatch that covers Dalhart: Dallam County EMS 155.2125 MHz, narrow FM, 371 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Dallam County channels that also cover Dalhart
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dallam County Fire | Dallam County Fire – Dispatch (Dalhart PANCOM) | 154.3550 In 153.8300 | 371 DPL | FMN | WQGL834 |
| Dallam County Fire | Dallam County Fire – Dispatch (Dalhart PANCOM) | 154.3550 In 153.8300 | NAC 61F | P25 | WQGL834 |
| Dallam County Fire | Dallam County Fire – Dispatch (Perico PANCOM) | 158.7825 In 153.8300 | 371 DPL | FMN | WQGL834 |
| Dallam County Fire | Dallam County Fire – Dispatch (Perico PANCOM) | 158.7825 In 153.8300 | NAC 61F | P25 | WQGL834 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dallam County EMS | Dallam County EMS – Dispatch (Perico PANCOM) | 155.2125 In 153.7625 | 371 DPL | FMN | WQGL834 |
| Dallam County EMS | Dallam County EMS – Dispatch (Perico PANCOM) | 155.2125 In 153.7625 | NAC 61F | P25 | WQGL834 |
| Dallam County EMS | Dallam County EMS – Dispatch (Dalhart PANCOM) | 155.9475 In 153.7625 | 371 DPL | FMN | WQGL834 |
| Dallam County EMS | Dallam County EMS – Dispatch (Dalhart PANCOM) | 155.9475 In 153.7625 | NAC 61F | P25 | WQGL834 |
Nearest trunked radio sites
Distances are measured from the center of Dalhart.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dalhart?
We do not have a fire dispatch channel listed specifically for Dalhart. The county-level fire dispatch channels in the same county: Dallam County Fire 154.3550 MHz, narrow FM, 371 DPL.
What frequency does EMS or the ambulance service use in Dalhart?
We do not have a EMS dispatch channel listed specifically for Dalhart. The county-level EMS dispatch channels in the same county: Dallam County EMS 155.2125 MHz, narrow FM, 371 DPL.
What scanner do I need to listen to fire and EMS in Dalhart?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Dalhart?
For Dalhart, start with the Canadian River site of Amarillo Radio Communications System (ARCS). Its control channels are 774.13125, 774.38125, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.