About Sunray Fire and EMS Frequencies
Quick answer: Fire dispatch for Sunray: Sunray Fire 154.3700 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Sunray: Moore County EMS 155.2350 MHz, narrow FM, 205 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Sunray conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sunray Fire | Sunray Fire – Dispatch | 154.3700 In 154.0100 | 146.2 PL | FMN | WQOW300 |
Moore County channels that also cover Sunray
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moore County Fire | South (South PANCOM FMN) | 154.0925 In 153.8825 | 205 DPL | FMN | WQGM884 |
| Moore County Fire | South (South PANCOM P25) | 154.0925 In 153.8825 | NAC 61F | P25 | WQGM884 |
| Moore County Fire | North (North PANCOM FMN) | 154.2125 In 153.8825 | 205 DPL | FMN | WQGM884 |
| Moore County Fire | North (North PANCOM P25) | 154.2125 In 153.8825 | NAC 61F | P25 | WQGM884 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moore County EMS | South (South PANCOM FMN) | 155.2350 In 156.2100 | 205 DPL | FMN | WQGM884 |
| Moore County EMS | South (South PANCOM P25) | 155.2350 In 156.2100 | NAC 61F | P25 | WQGM884 |
| Moore County EMS | North (North PANCOM FMN) | 155.8425 In 156.2100 | 205 DPL | FMN | WQGM884 |
| Moore County EMS | North (North PANCOM P25) | 155.8425 In 156.2100 | NAC 61F | P25 | WQGM884 |
Nearest trunked radio sites
Distances are measured from the center of Sunray.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sunray?
Fire dispatch channels listed for Sunray: Sunray Fire 154.3700 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Sunray?
We do not have a EMS dispatch channel listed specifically for Sunray. The county-level EMS dispatch channels in the same county: Moore County EMS 155.2350 MHz, narrow FM, 205 DPL.
What scanner do I need to listen to fire and EMS in Sunray?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Sunray?
For Sunray, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sunray fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Sunray are marked encrypted.