About Cooke County Police Frequencies
Quick answer: Dispatch for Cooke County: Cooke County Sheriff 155.1300 MHz, P25, NAC 295. Trunked: Denton County Regional Radio System, for example Cooke County Sheriff talkgroup 15001 (hex 3a99).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Denton County Regional Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cooke County, start with the Muenster site of Denton County Regional Radio System. Its control channels: 772.68125, 774.49375 MHz.
Data updated .
Cooke County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cooke County Sheriff | Cooke County Sheriff – Dispatch | 155.1300 In 155.9700 | NAC 295 | P25 | KNEY874 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cooke County Sheriff | Cooke County Sheriff – Tactical Channel | 155.9400 In 154.1000 | 173.8 PL | FMN | KNGY937 |
Cooke County trunked talkgroups
Denton County Regional Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cooke County Sheriff | Cooke County Sheriff – Dispatch | 15001 | 3a99 | T |
Radio system sites in Cooke County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cooke County
Common questions
What frequency do the police use in Cooke County?
Dispatch channels listed for Cooke County: Cooke County Sheriff 155.1300 MHz, P25, NAC 295.
What is the sheriff's dispatch frequency in Cooke County?
Cooke County Sheriff 155.1300 MHz, P25, NAC 295.
Do the police use a trunked radio system in Cooke County?
Yes. Law-enforcement talkgroups are listed for Denton County Regional Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Cooke County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cooke County?
For Cooke County, start with the Muenster site of Denton County Regional Radio System. Its control channels are 772.68125, 774.49375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cooke County police frequencies encrypted?
None of the 2 conventional frequencies listed for Cooke County are marked encrypted.
Are Cooke County police talkgroups encrypted?
None of the 1 talkgroups listed for Cooke County are marked encrypted.