Skip to content

Cooke County Fire and EMS Frequencies

Cooke County in Texas has 6 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 25 cities and communities below for local fire departments and EMS agencies.

About Cooke County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cooke County: Cooke County Fire 154.3925 MHz, P25, NAC 395. EMS dispatch for Cooke County: Cooke County EMS 462.9500 MHz, narrow FM, 179.9 PL. Trunked: Denton County Regional Radio System, for example Cooke County Fire talkgroup 15006 (hex 3a9e).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Denton County Regional Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cooke County, start with the Muenster site of Denton County Regional Radio System. Its control channels: 772.68125, 774.49375 MHz.

Data updated .

Cooke County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County FireCooke County Fire – Dispatch154.3925
In 150.7900
NAC 395P25WPKV449

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County FireCooke County Fire – Fire Ground154.3100CSQFMN—

EMS Dispatch

EMS Dispatch frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County EMSCooke County EMS – Dispatch462.9500
In 467.9500
179.9 PLFMNKNAE663

EMS Tactical

EMS Tactical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County EMSEMS Response155.5650
In 153.7400
107.2 PLFMNKNAE663

Hospitals & Medical

Hospitals & Medical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gainesville Memorial HospitalGainesville Memorial Hospital464.6375
In 469.6375
250.3 PLFMNWPYI487
Gainesville Memorial HospitalGainesville Memorial Hospital464.7125
In 469.7125
FMNWPYI487

Cooke County trunked talkgroups

Denton County Regional Radio System

Denton County Regional Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Cooke County FireCooke County Fire – Dispatch150063a9eT
Cooke County EMSCooke County EMS – Dispatch150043a9cT

Radio system sites in Cooke County

Program the control channel first; your scanner finds the voice channels from it.

Muenster · Denton County Regional Radio System
RFSS 1 · Site 4 (hex 4) · NAC 690
Control 772.68125, 774.49375
Voice 771.25625
Gainesville · Denton County Regional Radio System
RFSS 1 · Site 5 (hex 5) · NAC 690
Control 772.35625, 774.18125
Voice 771.00625
Cooke Northwest · Denton County Regional Radio System
RFSS 1 · Site 6 (hex 6) · NAC 690
Control 773.93125
Voice 769.75625, 772.05625
Cooke Northeast · Denton County Regional Radio System
RFSS 1 · Site 7 (hex 7) · NAC 690
Control 771.55625, 772.93125
Voice 769.08125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cooke County

Common questions

What frequency does the fire department use in Cooke County?

Fire dispatch channels listed for Cooke County: Cooke County Fire 154.3925 MHz, P25, NAC 395.

What frequency does EMS or the ambulance service use in Cooke County?

EMS dispatch channels listed for Cooke County: Cooke County EMS 462.9500 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Cooke County?

Yes. Fire and EMS talkgroups are listed for Denton County Regional Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cooke County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cooke County?

For Cooke County, start with the Muenster site of Denton County Regional Radio System. Its control channels are 772.68125, 774.49375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cooke County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Cooke County are marked encrypted.

Are Cooke County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Cooke County are marked encrypted.