Skip to content

Colorado County Fire and EMS Frequencies

Colorado County in Texas has 2 countywide conventional frequencies and 10 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Colorado County Fire and EMS Frequencies

Quick answer: Fire dispatch for Colorado County: Colorado County Fire 151.2500 MHz, FM, 146.2 PL. EMS dispatch for Colorado County: Colorado County EMS 155.7450 MHz, FM, 723 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Colorado County Fire talkgroup 1756 (hex 6dc).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Colorado County, start with the Glidden site of Texas Wide Area Radio Network (TxWARN). Its control channels: 773.68125, 774.69375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Colorado County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Colorado County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Colorado County FireColorado County Fire – Dispatch151.2500
In 153.8300
146.2 PLFMWPWG467

EMS Dispatch

EMS Dispatch frequencies for Colorado County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Colorado County EMSColorado County EMS – Dispatch155.7450
In 153.9950
723 DPLFMKWF871

Colorado County trunked talkgroups

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Colorado County FireColorado County Fire – Dispatch17566dcD
Colorado County FireNorth17606e0D
Colorado County FireWest17806f4D
Colorado County FireEast17816f5D
Colorado County FireSouth17826f6D
Colorado County EMSColorado County EMS – Dispatch17706eaD
Colorado County EMSEMS First Responders17086acD
Colorado County EMSEMS MCI17286c0D
Colorado County EMSEMS MCI17326c4D
1 encrypted talkgroup (cannot be monitored)
Texas Wide Area Radio Network (TxWARN) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Colorado County HospitalEMS to Columbus Community Hospital17846f8D Encrypted

Radio system sites in Colorado County

Program the control channel first; your scanner finds the voice channels from it.

Glidden · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 4 (hex 4)
Control 773.68125, 774.69375
Voice 771.54375, 771.83125, 772.20625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Colorado County

Common questions

What frequency does the fire department use in Colorado County?

Fire dispatch channels listed for Colorado County: Colorado County Fire 151.2500 MHz, FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Colorado County?

EMS dispatch channels listed for Colorado County: Colorado County EMS 155.7450 MHz, FM, 723 DPL.

Do fire departments and EMS use a trunked radio system in Colorado County?

Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Colorado County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Colorado County?

For Colorado County, start with the Glidden site of Texas Wide Area Radio Network (TxWARN). Its control channels are 773.68125, 774.69375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Colorado County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Colorado County are marked encrypted.

Are Colorado County fire and EMS talkgroups encrypted?

1 of the 10 talkgroups listed for Colorado County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.