Skip to content

Prosper Fire and EMS Frequencies

Prosper in Collin County, Texas has 0 conventional frequencies and 9 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Frisco (Frisco), about 6 miles away.

About Prosper Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Prosper: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL. Trunked: Frisco, for example Prosper Fire/EMS talkgroup 426 (hex 1aa).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Frisco: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Prosper, start with the Frisco site of Frisco, about 6 miles away. Its control channels: 858.1875, 858.6125, 859.0375 MHz.

Data updated .

Prosper trunked talkgroups

Frisco

Frisco talkgroups
AgencyDescriptionTalkgroupHexMode
Prosper Fire/EMSProsper Fire/EMS – Dispatch4261aaD
Prosper Fire/EMSMutual Aid to Celina41519fD
Prosper Fire/EMSProsper Fire/EMS – Fire Ground4161a0D
Prosper Fire/EMSProsper Fire/EMS – Fire Ground4171a1D
Prosper Fire/EMSProsper Fire/EMS – Fire Ground4241a8D
Prosper Fire/EMSAutomated Alerting4251a9D
Prosper Fire/EMSMutual Aid to Frisco4271abD
Prosper Fire/EMSProsper Fire/EMS – Fire Ground4331b1D
Prosper Fire/EMSEMS to Hospital4301aeD

Collin County channels that also cover Prosper

EMS Dispatch

EMS Dispatch frequencies for Collin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AMR Ambulance ServiceDispatch for Unincorporated Collin Co. Medical Response453.0750
In 458.0750
192.8 PLFMWPRS344
PHI Airmed EMSPHI Med 2 Dispatch152.9525
In 160.1250
118.8 PLFMWPZR839

Nearest trunked radio sites

Distances are measured from the center of Prosper.

Frisco · Frisco
RFSS 1 · Site 1 (hex 1) · NAC 360 · about 6 mi away
Control 858.1875, 858.6125, 859.0375, 859.6125
Voice 851.0625, 852.0625, 853.0625, 854.2125, 856.6125, 857.6125
McKinney Simulcast · McKinney
RFSS 1 · Site 1 (hex 1) · NAC 380 · about 10 mi away
Control 856.3625, 857.3625, 858.3625, 859.3625
Voice 854.2625, 854.7375
NCTCOG Collin · Dallas P25 / NCTCOG
Project 25 · RFSS 1 · Site 21 (hex 15) · NAC 370 · about 11 mi away
Control 769.56875, 770.35625, 770.60625
Voice 769.31875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Prosper?

We do not have a EMS dispatch channel listed specifically for Prosper. The county-level EMS dispatch channels in the same county: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Prosper?

Yes. Fire and EMS talkgroups are listed for Frisco: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Prosper?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Prosper?

For Prosper, start with the Frisco site of Frisco. Its control channels are 858.1875, 858.6125, 859.0375, 859.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Prosper fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Prosper are marked encrypted.