About Frisco Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Frisco: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL. Trunked: Frisco, for example Frisco Fire/EMS talkgroup 101 (hex 65).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Frisco: 19 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Frisco, start with the Frisco site of Frisco, about 1 miles away. Its control channels: 858.1875, 858.6125, 859.0375 MHz.
Data updated .
Frisco trunked talkgroups
Frisco
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Frisco Fire/EMS | Frisco Fire/EMS – Dispatch | 101 | 65 | D |
| Frisco Fire/EMS | Duty Chief Notification | 120 | 78 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Automated Alerting | 102 | 66 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Routine Calls | 103 | 67 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Routine Calls | 104 | 68 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Major Calls | 105 | 69 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Major Calls | 106 | 6a | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Major Calls/Events | 107 | 6b | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Events | 108 | 6c | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Events | 109 | 6d | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Mutual Aid McKinney | 110 | 6e | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Mutual Aid Plano | 111 | 6f | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Mutual Aid Little Elm | 113 | 71 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Mutual Aid Prosper | 114 | 72 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Events | 117 | 75 | D |
| Frisco Fire/EMS | Frisco Fire/EMS – Prevention | 118 | 76 | D |
| Frisco Fire/EMS | Medcomm | 112 | 70 | D |
| Frisco Fire/EMS | Medcomm | 115 | 73 | D |
| Frisco Fire/EMS | Hospital | 116 | 74 | D |
Collin County channels that also cover Frisco
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| AMR Ambulance Service | Dispatch for Unincorporated Collin Co. Medical Response | 453.0750 In 458.0750 | 192.8 PL | FM | WPRS344 |
| PHI Airmed EMS | PHI Med 2 Dispatch | 152.9525 In 160.1250 | 118.8 PL | FM | WPZR839 |
Nearest trunked radio sites
Distances are measured from the center of Frisco.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Frisco?
We do not have a EMS dispatch channel listed specifically for Frisco. The county-level EMS dispatch channels in the same county: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.
Do fire departments and EMS use a trunked radio system in Frisco?
Yes. Fire and EMS talkgroups are listed for Frisco: 19 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Frisco?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Frisco?
For Frisco, start with the Frisco site of Frisco. Its control channels are 858.1875, 858.6125, 859.0375, 859.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Frisco fire and EMS talkgroups encrypted?
None of the 19 talkgroups listed for Frisco are marked encrypted.